Japan, Kanetec
Kanetec KRA MAGNETIC RAIL
Product Made in Japan
Manufacturer: Kanetec
Model: KRA (KRA-A/KRA -B/KRA -C/KRA -D)
The magnetic rails are tools that are installed on the backside of belts to convey various items such as products and press scraps to assist such conveyance. These rails are used to improve the work efficiency.
Application
Recommended for such operations as vertical and inclined conveyance of filled cans and
empty cans, conveyance of press scraps and chips, leak inspection of aerosol cans and
belt conveyance in manufacturing processes.
Features
●Two types, permanent magnetic rails and electromagnetic rails are available according to operations.
●Easy handling of products and goods. No fi xtures are necessary and products and goods to convey are not damaged.
Dimensions
■Reject gate conveyor
Sorter
Application
●Can be used in lines to accept and reject inspected sheets.
●The flow of sheets can be branched to two directions.
■Backing conveyor
Reverser
Application
●Can be used in such operations as turning sheets or reversing the sheet flowing directions to inspect the backside of thin steel sheets and to shorten the drying line in painting shops and for alignment machines.
■Sheet piler
Steel sheet piler
Application
●Sheets can be piled smoothly by use of a magnetic conveyor.
■Permanent magnetic rail
KRA-A permanent magnetic rail.
A magnetic plate is mounted inside a stainless steel case. Can be easily connected to the poles of a permanent magnetic pulley. Used for elevator type magnetic conveyors.
KRA-B permanent magnetic rail
Poles of a magnet are projecting to the inside of a stainless steel case. The holding power via a belt is strong. Used for magnetic conveyors that convey thin steel sheets in the inverted posture.
※Sizes not listed above are also available upon request.
■Electromagnetic rail
KRA-C type electromagnetic rail
Used for magnetic conveyors that receive steel sheets that have been conveyed in the inverted posture by a piler. Rating: 180 VDC, continuous.
KRA-D electromagnetic rail with rollers
An electromagnetic rail having rollers. Used to prevent drooping of steel sheets after shearing machines.
■Rectifier RH-MW type Input 200 VAC, single-phase output 0‒180 VDC, 5 A/10 A
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec