Japan, Kanetec
Kanetec MTP MAGTAP
Product Made in Japan
Manufacturer: Kanetec
Model: MTP (MTP-MT8A)
Application
A tool designed to facilitate tapping of prepared holes in iron and steel plates, secured with a powerful magnet. Available in two types: permanent magnet and electromagnet. Tapping can be done either by manual tapping or using an electric tapper.
Features
●The Magtap uses its strong holding power to secure a stable mounting position and posture for easy tapping.
■MTP-MT8A《Electric type》
●The revolution can be varied steplessly according to tap sizes.
●Small and light weight for easy carrying around.
●The tapper can be changed to an electric drill by changing the mounting fixtures.
Dimensions
Specifications
| Model | Tap Feeding | Tapper Type | Tapping Capacity | Max. Stroke | Holding Method | Holding Power |
|---|---|---|---|---|---|---|
| MTP-13B | Manual | – | M 3(0.11 )-M12 (0.47) | 60(2.36) | Permanent magnet | 0.8kN ( 350kgf) |
| MTP-25A | MIO (0.39)-M24 (0.94) | 85(3.34) | Electro Magnet | 6kN (600kgf) | ||
| MTP-MT8A | Electric | UT- 8V | M 3(0.11)-M 8(0.31) | 100 3.93) | 3.5kN (350kgf) | |
| MTP-M8A | – | |||||
| MTP-MT16 | UT-14Y | M 8(0.31 )-M 16(0.62) | 140(5.51) | 8kN (800kgf) | ||
| MTP-M16 | – |
| Model | Power Source | Power Consumption | Dimensions | Turning Angle | Fine Back-Forth Move | Mass | ||
|---|---|---|---|---|---|---|---|---|
| Electromagnet | Tapper | Magnet | Height | |||||
| MTP-13B | – | – | – | 50 1 96 X 58.5 2.30 x 55 (2.16) | 210(8.26) | – | – | 2.5kg/ 5.51 lb |
| MTP-25A | Singlephase 100 VAC | 30W | 0116(4.56) x75(2.95) | 360 14.1) | 14kg/ 30.8 lb | |||
| MTP-MT8A | 34W | 285W | 0105(4 13) x60(2.36) | (440) (1 7.3) 240 9 44) | 9kg 19.81b | |||
| MTP-M8A | – | 240 (9.44) | 6.5kg/ 14.31b | |||||
| MTP-MT16 | 360W | 0142(5.59) x 70 (2.75 | (390) (15.3) 355 (13.9) | 320 | 30(1.18) | 18kg/ 39.6 lb | ||
| MTP-M16 | – | 355 (13.9) | 15.5kg/ | |||||
※The power cable included is 5 m long for MTP-25A and MTP-MT16,MTP-M16 and 2 m long for MTP-MT8A,MTP-M8A. ※For MTP-MT, use a taper tap or plug tap.
※MTP-MT16 requires tap holders suitable for tap sizes, which are optionally available. (See the figures below.)
※The figures in ( ) in “Height” are the height with the electric tapper installed. ※The holding power is based on a test piece of SS400, 25 mm thick, mill scale surface.
Information about commercially available tap holders for tapper UT-14Y
… Tap holder sets/major dimensions and applicable taps (Use commercially available holders according to tap sizes.)
| Name | Code No. | Shape | Applicable Tap Size | Tap Mounting Dimensions | External Dimensions | ||||
|---|---|---|---|---|---|---|---|---|---|
| Metric | Unified | d | K | S | D | L | |||
| M8 Tap holder set | 995308 | A | M 8(0 | — | 6.2(0 | 5 | 12.7(0.50) | 36(1.41) | 49(1.92) |
| M10 3/8 Tap holder set | 995280 | M10 (0.39) | 3/8 | 7 (0.27) | 5.5(0.21) | ||||
| M12 Tap holder set | 995283 | B | M12(0.47) | — | 8.5 0.33) | 6.5(0.25) | 50(1.96) | ||
| *1/2 Tap holder set | 995281 | — | 1/2 | 9 (0.35) | 7 (0.27) | 42(1.65) | |||
| M14 Tap holder set | 995300 | C | M14(0.55i | — | 10.5(0.41) | 8 (0.31) | 52(2.04) | ||
| 5/8 Tap holder set | 995282 | — | 5/8 | 12 (0.47) | 9 (0.35) | 56(2.20) | |||
| M16 Tap holder set | 996341 | M16(0 | — | 12.5(0 | 10 | ||||
The 1/2 tap holder set marked by * is a standard accessory. The M12 tap can be used by replacing the tap drive only with the one for M12.
The holders other than the one marked by * are all commercially available. Please purchase them.
Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec
Related Products
-
NDV Pneumatically operated ON-OFF valve (double acting) CPN1200R type Cast iron butterfly valves (C201R type)
-
Mikasa MVH-208DSY Reversible Compactor
-
Kobata MC Type Pressure Relay
-
NAC – TL TYPE Brass SF (Female thread)
-
Obishi Keiki Seisakusho GE Ultra Precision Steel Master Angle
-
Mirai Kogyo KGP-DS36 Adjustment Fixing Bar (for frame and bracing)
REQUEST QUOTATION
PAYMENT
LINK
