Nagase RooTAC (TOTAKU) | Kouei Japan Trading | Get Quotation

Nagase RooTac TOTAKU Abrasion Resistant Hose Heran

kvt part2 — Tue, 26 May 2020 11:31:07 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Heran

Feature

Made with abrasion-resistant rubber, offering approximately three times the abrasion resistance compared to TOTAKU SD-A.
Equipped with conductive rubber for static electricity prevention.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1.5	38	1.50	38.0	1.85	47.0	0.35	9.0	0.36	540	164	50	21.76	0.15	5.12	130
2	50	2.00	50.8	2.38	60.5	0.39	10.0	0.55	825	164	50	17.40	0.12	6.50	165
2.5	65	2.50	63.5	2.96	75.1	0.56	14.3	0.74	1105	65/164	20/50	17.40	0.12	7.68	195
3	75	3.00	76.2	3.53	89.6	0.59	15.1	1.06	1570	65/164	20/50	14.50	0.10	8.27	210
3.5	90	3.50	88.9	4.10	104.2	0.64	16.2	1.43	2130	65/164	20/50	14.50	0.10	11.81	300
4	100	4.00	101.6	4.66	118.4	0.65	16.4	1.73	2570	65/164	20/50	14.50	0.10	12.99	330
5	125	4.96	125.9	5.69	144.5	0.87	22.0	2.46	3660	65	20	14.50	0.10	15.94	405
6	150	6.00	152.4	6.77	172.0	0.87	22.0	3.25	4830	65	20	14.50	0.10	26.57	675

The post Nagase RooTac TOTAKU Abrasion Resistant Hose Heran first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-DC

kvt part2 — Tue, 26 May 2020 00:53:06 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Clean-DC

Feature

Specifically designed for discharge, ensuring smooth operation on-site.
Discharge hose exclusively for vacuum trucks.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	psi	MPa	inch	mm
2.5	65	2.50	63.5	3.09	78.5	0.56	14.3	1.17	1740	58.02	0.40	31.50	800
3	75	3.00	76.2	3.65	92.8	0.59	15.1	1.51	2240	50.76	0.35	35.43	900

The post Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-DC first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-CW

kvt part2 — Tue, 26 May 2020 00:44:32 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Clean-CW

Feature

A versatile, all-season hose designed to handle a wide range of temperature changes in working environments.
Exceptional cold resistance, suitable for use even in cold climates. (Operating temperature range: -20°C [-4°F] to 50°C [122°F]).
Exclusively for vacuum trucks.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	ft	m	psi	MPa	inch	mm
2	48	1.89	48.0	2.22	56.5	0.65	960	65/98 131/164	20/30 40/50	29.01	0.20	15.75	400

The post Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-CW first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-S

kvt part2 — Tue, 26 May 2020 00:36:05 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Clean-S

Feature

A lightweight version of the TOTAKU CLEAN-W.
Exclusively for vacuum trucks.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	psi	MPa	inch	mm
2	48	1.89	48.0	2.26	57.5	0.70	1035	43.51	0.30	17.72	450

The post Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-S first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-W

kvt part2 — Mon, 25 May 2020 23:41:53 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Clean-W

Feature

The outer surface is designed for abrasion resistance, providing outstanding durability.
Easy to wash with water, making it highly hygienic.
Exclusively for vacuum trucks.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Allowable Pressure (At room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	psi	MPa	inch	mm
2	50	2.00	50.8	2.42	61.4	0.81	1200	43.51	0.30	19.69	500
2.5	65	2.50	63.5	2.99	76.0	1.20	1790	43.51	0.30	27.56	700

The post Nagase RooTac TOTAKU Hose For Vacuum Truck Clean-W first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-ACE

kvt part2 — Mon, 25 May 2020 23:34:55 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Heran-ACE

Feature

Abrasion resistance is four times that of TOTAKU HERAN-N.
Lightweight and flexible design.
Pressure rating of approximately 72.5 psi (0.5 MPa) for robust performance.
Reinforced with durable fibers, this hose is suitable for use in situations where elevation changes may exert tensile loads.
Includes a grounding wire for excellent static electricity prevention.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
4	100	4.00	101.6	4.80	121.8	0.65	16.4	2.18	3240	65	20	72.52	0.50	14.17	360
5*	125	4.96	125.9	5.99	152.2	0.87	22.0	3.04	4530	65	20	72.52	0.50	21.26	540
6*	150	6.00	152.4	6.67	182.4	1.02	26.0	4.11	6110	65	20	72.52	0.50	35.43	900
8*	200	8.02	203.7	8.91	226.4	1.10	28.0	5.63	8380	32	10	72.52	0.50	41.34	1050

The post Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-ACE first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-CL

kvt part2 — Mon, 25 May 2020 23:27:43 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Heran-CL

Feature

Abrasion resistance is four times that of TOTAKU HERAN-N.
Transparent design allows visibility of the contents.
Includes a grounding wire for excellent static electricity prevention.
The inner surface is extremely smooth, ensuring efficient fluid transport.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1.25*	32	1.26	32.0	1.65	41.8	0.51	765	164	50	58.02	0.40	11.81	300
1.5	38	1.50	38.0	1.91	48.5	0.61	910	164	50	58.02	0.40	13.78	350
2	50	2.00	50.8	2.42	61.4	0.83	1230	164	50	58.02	0.40	21.65	550
2.5	65	2.50	63.5	2.99	76.0	1.21	1805	65/164	20/50	58.02	0.40	31.50	800
3	75	3.00	76.2	3.52	89.5	1.48	2200	65/164	20/50	58.02	0.40	33.46	850
3.5	90	3.50	88.9	4.02	102.0	1.69	2510	65/164	20/50	43.51	0.30	43.70	1110
4	100	4.00	101.6	4.61	117.0	2.24	3340	65/164	20/50	43.51	0.30	49.21	1250
5	125	5.01	127.3	5.59	142.0	2.73	4060	65	20	36.26	0.25	88.58	2250
6	150	6.00	152.4	6.67	169.4	3.85	5730	65	20	29.01	0.20	108.27	2750
8	200	8.00	203.2	8.91	226.4	6.69	9960	32	10	29.01	0.20	157.48	4000

The post Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-CL first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-N

kvt part2 — Mon, 25 May 2020 22:47:12 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Heran-N

Feature

Designed to withstand hot air up to 100°C (approximately 212°F) and handle temperatures up to 120°C (approximately 248°F) in a straight hose configuration.
Enhanced safety through conductive rubber and the use of steel wire for grounding effects.
Resistant to ozone degradation compared to TOTAKU HERAN.
Superior abrasion resistance, along with excellent weather resistance.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1.5	38	1.50	38.0	1.88	47.8	0.35	9.0	0.38	570	164	50	14.50	0.10	5.31	135
2	50	2.00	50.8	2.46	62.6	0.39	10.0	0.61	905	164	50	14.50	0.10	7.09	180
2.5	65	2.50	63.5	3.03	77.0	0.56	14.3	0.83	1240	65/164	20/50	14.50	0.10	8.86	225
3	75	3.01	76.4	3.62	92.0	0.59	15.1	1.14	1695	65/164	20/50	14.50	0.10	11.81	300
3.5	90	3.50	88.9	4.11	104.5	0.64	16.2	1.41	2100	65/164	20/50	14.50	0.10	15.35	390
4	100	4.00	101.6	4.72	120.0	0.65	16.4	1.76	2620	65/164	20/50	14.50	0.10	22.44	570
5	125	5.00	127.0	5.78	146.8	0.87	22.0	2.59	3860	65	20	14.50	0.10	24.80	630
6	150	6.00	152.4	6.81	173.0	0.87	22.0	3.30	4910	65	20	14.50	0.10	35.43	900
8	200	8.05	204.4	8.90	226.0	0.87	22.0	5.20	7740	32	10	14.50	0.10	41.34	1050

The post Nagase RooTac TOTAKU Abrasion Resistant Hose Heran-N first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-ABRW Mortar Hoses

kvt part2 — Wed, 13 May 2020 11:01:16 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-ABRW

Feature

The inner surface is made of rubber, providing superior pressure resistance and durability compared to LINE POWER-CV.
Intermediate and terminal hose for mortar pumping.
Suitable for transporting highly viscous materials and use on steep inclines.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	ft	m	psi	MPa	inch	mm
1.5	40	1.54	39.0	2.19	55.7	0.91	1355	65	20	217.56	1.50	25.59	650
2	50	1.99	50.5	2.60	66.0	1.04	1555	65	20	217.56	1.50	35.43	900

The post Nagase RooTac TOTAKU Line Power-ABRW Mortar Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-OT Oil-Resistant Hoses

kvt part2 — Mon, 27 Apr 2020 03:38:21 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-OT

Feature

Offers the highest pressure resistance among oil-resistant hoses, with an allowable pressure of 217.5 psi (1.50 MPa).
Provides anti-static protection with conductive oil-resistant rubber and a steel wire.

Standard Dimensions and Properties

Nominal Diameter	Inner Diameter	Outer Diameter	Reference Weight	Length	Allowable Pressure (at room temperature)	Allowable Bend Radius (to the center axis of the hose)
1.5 inch / 38 mm	1.52 inch / 38.5 mm	2.02 inch / 51.3 mm	0.93 lbs/ft / 1390 g/m	65/164 ft / 20/50 m	217.56 psi / 1.50 MPa	19.69 inch / 500 mm
2 inch / 50 mm	2.00 inch / 50.8 mm	2.52 inch / 64.0 mm	1.23 lbs/ft / 1835 g/m	65/164 ft / 20/50 m	217.56 psi / 1.50 MPa	19.69 inch / 500 mm
2.5 inch / 65 mm	2.50 inch / 63.5 mm	3.04 inch / 77.1 mm	1.70 lbs/ft / 2530 g/m	65/164 ft / 20/50 m	217.56 psi / 1.50 MPa	24.61 inch / 625 mm
3 inch / 75 mm	3.01 inch / 76.5 mm	3.62 inch / 92.0 mm	2.30 lbs/ft / 3420 g/m	65/164 ft / 20/50 m	217.56 psi / 1.50 MPa	31.50 inch / 800 mm
4 inch / 100 mm	4.00 inch / 101.6 mm	4.69 inch / 119.0 mm	3.47 lbs/ft / 5170 g/m	65 ft / 20 m	217.56 psi / 1.50 MPa	56.10 inch / 1425 mm

The post Nagase RooTac TOTAKU Line Power-OT Oil-Resistant Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-ATO Oil-Resistant Hoses

kvt part2 — Mon, 27 Apr 2020 03:33:40 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-ATO

Feature

About half the weight of a rubber hose with excellent flexibility.
Oil-resistant rubber is used for the inner surface.
Provides anti-static protection with conductive oil-resistant rubber and a built-in ground wire.

Standard Dimensions and Properties

Nominal Diameter	Inner Diameter	Outer Diameter	Pitch	Reference Weight	Length	Allowable Pressure (at room temperature)	Allowable Bend Radius (to the center axis of the hose)
2	50	50.8	2.62	1.07	1590	101.53 psi / 0.70 MPa	17.72 in / 450 mm
2.5	65	63.5	3.21	1.32	1970	101.53 psi / 0.70 MPa	21.65 in / 550 mm
3	75	76.2	3.89	1.96	2920	101.53 psi / 0.70 MPa	30.51 in / 775 mm
4	100	101.6	5.12	3.09	4600	101.53 psi / 0.70 MPa	49.21 in / 1250 mm
5	125	127.0	6.18	4.08	6070	101.53 psi / 0.70 MPa	59.06 in / 1500 mm
6*	150	152.4	7.38	5.20	7740	101.53 psi / 0.70 MPa	78.74 in / 2000 mm

The post Nagase RooTac TOTAKU Line Power-ATO Oil-Resistant Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-CVOR Oil-Resistant Hoses

kvt part2 — Mon, 27 Apr 2020 03:26:25 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-CVOR

Feature

Contains reinforcement fibers, offering superior pressure resistance compared to SD-COR.
Built-in ground wire helps prevent static electricity buildup.
Ideal for oil transfer in refineries and general industrial facilities.

Standard Dimensions and Properties

Nominal Diameter	Inner Diameter	Outer Diameter	Reference Weight	Length	Allowable Pressure (at room temperature)	Allowable Bend Radius (to the center axis of the hose)
1.25*	32 / 1.26	32.0 / 1.78	0.65 / 960	65/164 / 20/50	101.53 / 0.70	19.69 / 500
1.5	38 / 1.52	38.5 / 1.99	0.76 / 1125	65/164 / 20/50	101.53 / 0.70	23.62 / 600
2	50 / 2.00	50.8 / 2.52	1.01 / 1505	65/164 / 20/50	101.53 / 0.70	29.53 / 750

The post Nagase RooTac TOTAKU Line Power-CVOR Oil-Resistant Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU SD-COR Oil-Resistant Hoses

kvt part2 — Mon, 27 Apr 2020 03:21:02 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-COR

Feature

An all-resin oil-resistant hose.
Designed with a special oil-resistant resin, making it suitable for transporting oils.
Used for transporting diesel, kerosene, and Heavy fuel Oil (HFO).
Suitable for both suction and discharge.

Standard Dimensions and Properties

Nominal Diameter	Inner Diameter	Outer Diameter	Reference Weight	Length	Allowable Pressure (at room temperature)	Allowable Bend Radius (to the center axis of the hose)
1	25	25.4	1.23	31.2	0.23	340
1.25	32	32.0	1.54	39.2	0.35	515
1.5	38	38.0	1.81	46.0	0.44	655
2	50	50.8	2.40	61.0	0.76	1130
2.5	65	63.5	2.94	74.8	1.03	1535
3*	75	76.2	3.46	88.0	1.27	1895
4*	100	101.6	4.56	115.8	2.07	3080

The post Nagase RooTac TOTAKU SD-COR Oil-Resistant Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-CV Mortar Hoses

kvt part2 — Mon, 27 Apr 2020 03:14:56 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-CV

Feature

A durable resin hose with pressure and abrasion resistance.
Built to withstand external pressure without flattening or buckling.
Designed specifically as an end hose for mortar pumping

Standard Dimensions and Properties

Nominal Diameter	Inner Diameter	Outer Diameter	Reference Weight	Length	Allowable Pressure (at room temperature)	Allowable Bend Radius (to the center axis of the hose)
1.5	40	2.19	0.91	65/164	217.56	25.59
2	50	2.60	1.04	65/164	217.56	35.43

The post Nagase RooTac TOTAKU Line Power-CV Mortar Hoses first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-C Pressure Abrasion Resistant Hose

kvt part2 — Mon, 27 Apr 2020 02:31:56 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-C

Feature

A fully resin-based pressure-resistant hose.
Excellent pressure resistance with minimal elongation.
The outer surface is protected by rigid PVC, making it highly resistant to external abrasion and preventing exposure of the reinforcement fibers.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1.25	32	1.26	32.0	1.77	45.0	0.69	1020	65/164	20/50	145.04	1.00	16.73	425
1.5	38	1.50	38.2	2.01	51.0	0.82	1225	65/164	20/50	145.04	1.00	19.69	500
2	50	2.00	50.8	2.56	65.0	1.09	1625	65/164	20/50	145.04	1.00	31.50	800
2.5	65	2.50	63.5	3.16	80.3	1.66	2470	65/164	20/50	145.04	1.00	37.40	950
3*	75	3.00	76.2	3.72	94.5	2.06	3060	65/164	20/50	145.04	1.00	49.21	1250
4*	100	4.00	101.6	4.92	125.0	3.70	5510	65	20	101.53	0.70	76.77	1950

The post Nagase RooTac TOTAKU Line Power-C Pressure Abrasion Resistant Hose first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-WA Pressure Abrasion Resistant Hose

kvt part2 — Mon, 27 Apr 2020 00:46:15 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-WA

Feature

With an allowable pressure of 218 psi (1.50 MPa) at normal temperature, this hose offers the highest pressure resistance among pressure- and abrasion-resistant hoses.
Suitable for general water supply, cooling water, and wastewater.
Ideal for water supply and discharge in general factories, civil engineering and construction sites, and shipbuilding facilities.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1.5	38	1.52	38.5	2.07	52.5	0.93	1380	65/164	20/50	217.56	1.50	19.69	500
2	50	2.00	50.8	2.61	66.2	1.34	1990	65/164	20/50	217.56	1.50	19.69	500
2.5	65	2.50	63.5	3.11	78.9	1.74	2595	65/164	20/50	217.56	1.50	24.61	625
3	75	3.01	76.5	3.70	93.9	2.40	3575	65/164	20/50	217.56	1.50	31.50	800
4	100	4.00	101.6	4.76	121.0	3.59	5340	65	20	217.56	1.50	56.10	1425

The post Nagase RooTac TOTAKU Line Power-WA Pressure Abrasion Resistant Hose first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-ATL Pressure Abrasion Resistant Hose

kvt part2 — Mon, 27 Apr 2020 00:25:58 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-ATL

Feature

A lightweight version of the LINE POWER-AT.
Suction and discharge of muddy water for civil engineering projects, such as mud-water shield construction.
Suction and discharge of powdered and granular materials, such as cement.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
4*	100	4.00	101.6	4.96	126.0	0.65	16.4	2.42	3600	65	20	101.53	0.70	39.37	1000
6*	150	6.00	152.4	7.22	183.5	0.87	22.0	4.31	6420	65	20	101.53	0.70	68.90	1750

The post Nagase RooTac TOTAKU Line Power-ATL Pressure Abrasion Resistant Hose first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-ATS Pressure Abrasion Resistant Hose

kvt part2 — Mon, 27 Apr 2020 00:00:52 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-ATS

Feature

A large-diameter version of the LINE POWER-AT.
Designed with a thicker layer of abrasion-resistant rubber compared to the standard LINE POWER-AT.
Suction and discharge of sand, gravel, sludge, and grains during harvest.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
10*	250	10.08	256.0	12.01	305.0	1.00	25.5	12.93	19240	16	5	145.04	1.00	187.01	4750
12*	300	12.13	308.0	14.13	359.0	1.10	28.0	15.31	22780	16	5	72.52	0.50	196.85	5000

The post Nagase RooTac TOTAKU Line Power-ATS Pressure Abrasion Resistant Hose first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Pressure Abrasion Resistant Hose SHIMETAC For Line Power-AT

kvt part2 — Sun, 26 Apr 2020 22:30:08 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SHIMETAC for Line Power-AT

Feature

The allowable pressure with a SHIMETAC connection matches the allowable pressure of the hose itself.
Fittings can be easily attached and removed on-site.

Applicable Sizes

2 in (φ50 mm) to 6in (φ150mm)

Line Power-AT Standard Fittings and Band Allowable Pressure Table

Diameter		SHIMETAC Tightening		Aluminum Crimping with Locking Mechanism		Structural Steel Crimping with Locking Mechanism
inch	mm	psi	MPa	psi	MPa	psi	MPa
2	50	145.04	1.00	145.04	1.00	—	—
2.5	65	145.04	1.00	145.04	1.00	—	—
3	75	145.04	1.00	145.04	1.00	—	—
4	100	145.04	1.00	145.04	1.00	—	—
5	125	145.04	1.00	—	—	145.04	1.00
6	150	145.04	1.00	—	—	145.04	1.00
8	200	—	—	—	—	145.04	1.00

Diameter		TOTAKU Power Band Tightening		Aluminum Crimping without Locking Mechanism
inch	mm	psi	MPa	psi	MPa
2	50	72.52	0.50	101.53	0.70
2.5	65	72.52	0.50	101.53	0.70
3	75	72.52	0.50	101.53	0.70
4	100	72.52	0.50	101.53	0.70
5	125	72.52	0.50	—	0.50
6	150	72.52	0.50	—	0.50
8	200	72.52	0.50	—	0.50

The post Nagase RooTac TOTAKU Pressure Abrasion Resistant Hose SHIMETAC For Line Power-AT first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Line Power-AT Pressure Abrasion Resistant Hose

kvt part2 — Sun, 26 Apr 2020 22:21:44 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line Power-AT

Feature

Exceptional pressure resistance with an allowable pressure of 145 psi (1.00 MPa) at normal temperature, built to minimize stretch under pressure.
The inner layer is made from abrasion-resistant rubber, offering outstanding durability.
Engineered to withstand external pressure with minimal deformation.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
2	50	2.00	50.8	2.74	69.5	0.39	10.0	1.16	1725	65/164	20/50	145.04	1.00	23.62	600
2.5	65	2.50	63.5	3.39	86.0	0.56	14.3	1.53	2270	65/164	20/50	145.04	1.00	29.53	750
3	75	3.00	76.2	3.92	99.5	0.59	15.1	1.87	2790	65/164	20/50	145.04	1.00	29.53	750
4	100	4.00	101.6	5.08	129.0	0.67	17.0	2.96	4400	65/164	20/50	145.04	1.00	49.21	1250
5	125	5.00	127.0	6.28	159.5	0.87	22.0	4.11	6110	65	20	145.04	1.00	66.93	1700
6	150	6.00	152.4	7.38	187.5	0.87	22.0	5.20	7740	65	20	145.04	1.00	78.74	2000
8	200	8.00	203.2	9.74	247.5	0.98	25.0	8.90	13250	32	10	145.04	1.00	88.58	2250

The post Nagase RooTac TOTAKU Line Power-AT Pressure Abrasion Resistant Hose first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Anti-Static Hoses Duct-AS

kvt part2 — Sun, 26 Apr 2020 22:14:39 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-AS

Feature

This is the duct type of the SD-AS hose.
Made with a specially formulated soft resin that provides long lasting static electricity prevention.
Suitable for exhaust in environments where static electricity must be avoided.
Ideal for dust collection in woodworking machinery.
Also suitable for transporting non-food powders.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Depressurization (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
1.25	32	1.28	32.4	1.52	38.6	0.33	8.4	0.15	220	164	50	8.70	0.06	-19.49	-66.0	1.26	32
1.5	38	1.47	37.3	1.75	44.5	0.36	9.2	0.20	295	164	50	8.70	0.06	-19.49	-66.0	1.50	38
2	50	1.99	50.6	2.37	60.2	0.39	10.0	0.38	560	98	30	7.25	0.05	-19.49	-66.0	1.97	50
2.5	65	2.46	62.4	2.83	72.0	0.47	12.0	0.41	615	98	30	5.80	0.04	-19.49	-66.0	2.56	65
3*	75	3.01	76.4	3.40	86.4	0.51	13.0	0.52	775	98	30	5.80	0.04	-9.74	-33.0	2.95	75
3.5*	90	3.50	88.9	3.94	100.1	0.53	13.5	0.64	945	98	30	4.35	0.03	-9.74	-33.0	3.54	90
4*	100	4.00	101.6	4.42	112.2	0.59	15.0	0.77	1145	98	30	4.35	0.03	-6.35	-21.5	3.94	100
5	125	4.96	125.9	5.42	137.7	0.83	21.0	0.91	1350	65	20	2.90	0.02	-5.91	-20.0	4.92	125
6	150	6.00	152.4	6.49	164.8	0.79	20.0	1.09	1620	65	20	2.90	0.02	-4.28	-14.5	5.91	150

The post Nagase RooTac TOTAKU Anti-Static Hoses Duct-AS first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Anti-Static Hoses And Ducts SD-AS

kvt part2 — Sun, 26 Apr 2020 21:57:39 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-AS

Feature

Made with a specially formulated soft resin that provides long lasting static electricity prevention.
The clear green material allows for visual confirmation of transported items.
Ideal for transporting resin pellets.
Suitable for transporting powders and granules.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (th the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1	25	1.00	25.4	1.21	30.8	0.30	7.5	0.13	200	164	50	29.01	0.20	2.76	70
1.25	32	1.26	32.0	1.50	38.2	0.33	8.5	0.17	255	164	50	21.76	0.15	3.15	80
1.5	38	1.50	38.0	1.76	44.6	0.35	9.0	0.26	385	164	50	21.76	0.15	3.54	90
2	50	2.00	50.8	2.28	58.0	0.39	10.0	0.36	540	164	50	14.50	0.10	5.91	150
2.5	65	2.50	63.5	2.87	73.0	0.56	14.3	0.54	810	65/164	20/50	14.50	0.10	7.09	180
3*	75	3.00	76.2	3.44	87.5	0.59	15.1	0.76	1125	65/164	20/50	14.50	0.10	8.27	210
4*	100	4.00	101.6	4.53	115.0	0.65	16.4	1.32	1965	65/164	20/50	14.50	0.10	11.81	300
5	125	4.96	125.9	5.57	141.6	0.87	22.0	1.69	2520	65	20	14.50	0.10	13.78	350
6	150	6.00	152.4	6.77	172.0	0.87	22.0	3.04	4530	65	20	21.76	0.15	26.57	675

The post Nagase RooTac TOTAKU Anti-Static Hoses And Ducts SD-AS first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Anti-Static Hoses And Ducts SD-CE

kvt part2 — Sun, 26 Apr 2020 21:25:18 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-CE

Feature

Equipped with a built-in copper grounding wire for enhanced static electricity prevention.
Transparent design allows for easy visual confirmation of transported materials.
Ideal for transporting resin pellets.
Suitable for transporting powders and granules (non-food items).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1	25	1.00	25.4	1.33	33.7	0.38	565	164	50	72.52	0.50	9.45	240
1.25	32	1.26	32.0	1.65	41.8	0.49	735	164	50	65.27	0.45	13.39	340
1.5	38	1.50	38.0	1.89	48.0	0.58	870	164	50	58.02	0.40	13.78	350
2	50	2.00	50.8	2.50	63.5	0.98	1455	164	50	58.02	0.40	19.69	500
2.5	65	2.50	63.5	3.02	76.8	1.28	1905	65/164	20/50	58.02	0.40	23.62	600
3*	75	3.00	76.2	3.54	89.8	1.52	2260	65/164	20/50	58.02	0.40	30.51	775
3.5*	90	3.50	88.9	4.05	102.8	1.82	2710	65	20	43.51	0.30	41.93	1065
4*	100	4.00	101.6	4.65	118.0	2.43	3620	65	20	43.51	0.30	45.28	1150
5	125	5.00	127.0	5.63	143.0	2.91	4330	65	20	36.26	0.25	62.99	1600
6	150	6.00	152.4	6.73	171.0	3.95	5880	65	20	29.01	0.20	73.82	1875
8	200	8.00	203.2	8.92	226.5	6.69	9960	32	10	29.01	0.20	118.11	3000

The post Nagase RooTac TOTAKU Anti-Static Hoses And Ducts SD-CE first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction SD-C3

kvt part2 — Sun, 26 Apr 2020 01:05:06 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-C3

Feature

This is a lightweight version of SD-C.
Suitable for both suction and discharge, but especially ideal for discharge use.
Useful for suction and drainage in agriculture, industry, and civil construction.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1	25	1.00	25.4	1.20	30.6	0.19	280	164	50	87.02	0.60	10.83	275
1.25	32	1.26	32.0	1.48	37.6	0.26	390	164	50	72.52	0.50	14.76	375
1.5	38	1.50	38.0	1.73	44.0	0.33	485	164	50	58.02	0.40	18.70	475
2	50	2.00	50.8	2.30	58.5	0.55	825	164	50	50.76	0.35	24.02	610
2.5	65	2.50	63.5	2.86	72.6	0.80	1195	65/164	20/50	50.76	0.35	31.50	800
3*	75	3.00	76.2	3.37	85.5	0.99	1470	65/164	20/50	50.76	0.35	53.54	1360
4*	100	4.00	101.6	4.45	113.0	1.70	2530	65/164	20/50	43.51	0.30	57.09	1450
5	125	5.00	127.0	5.47	139.0	2.22	3300	65	20	43.51	0.30	98.43	2500
6	150	6.00	152.4	6.54	166.0	2.93	4360	65	20	36.26	0.25	114.17	2900
8	200	8.00	203.2	8.71	221.2	5.11	7610	32	10	29.01	0.20	118.11	3000

The post Nagase RooTac TOTAKU General Suction SD-C3 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction SD-C

kvt part2 — Sun, 26 Apr 2020 00:58:42 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-C

Feature

Smooth surfaces on both the interior and exterior.
Offers better pressure resistance than SD-A.
The transparent soft section enables easy monitoring of transported materials.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
0.75	19	0.75	19.0	0.95	24.2	0.15	220	164	50	87.02	0.60	4.53	115
1	25	1.00	25.4	1.23	31.2	0.23	340	164	50	72.52	0.50	9.45	240
1.25	32	1.26	32.0	1.54	39.2	0.34	510	164	50	65.27	0.45	13.39	340
1.5	38	1.50	38.0	1.81	46.0	0.44	650	164	50	58.02	0.40	13.78	350
2	50	2.00	50.8	2.40	61.0	0.75	1120	164	50	58.02	0.40	19.69	500
2.5	65	2.50	63.5	2.94	74.8	1.02	1525	65/164	20/50	58.02	0.40	23.62	600
3*	75	3.00	76.2	3.46	88.0	1.27	1885	65/164	20/50	58.02	0.40	30.51	775
3.5*	90	3.50	88.9	3.96	100.5	1.47	2190	65	20	43.51	0.30	41.93	1065
4*	100	4.00	101.6	4.56	115.8	2.07	3080	65	20	43.51	0.30	45.28	1150
5**	125	5.00	127.0	5.55	141.0	2.46	3660	65	20	36.26	0.25	62.99	1600
6**	150	6.00	152.4	6.61	167.8	3.36	5000	65	20	29.01	0.20	73.82	1875
8**	200	8.00	203.2	8.83	224.4	5.84	8690	32	10	29.01	0.20	118.11	3000

The post Nagase RooTac TOTAKU General Suction SD-C first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction SD-A2

kvt part2 — Sun, 26 Apr 2020 00:51:25 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-A2

Feature

This is a lightweight version of SD-A.
It provides enhanced flexibility compared to SD-A.
Suitable for both suction and discharge, but especially ideal for suction use.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
1	25	1.00	25.4	1.21	30.8	0.30	7.5	0.13	200	164	50	29.01	0.20	2.76	70
1.25	32	1.26	32.0	1.50	38.2	0.33	8.5	0.17	255	164	50	21.76	0.15	3.15	80
1.5	38	1.50	38.0	1.76	44.6	0.35	9.0	0.26	385	164	50	21.76	0.15	3.54	90
2	50	2.00	50.8	2.28	58.0	0.39	10.0	0.36	540	164	50	14.50	0.10	5.91	150
2.5	65	2.50	63.5	2.87	73.0	0.56	14.3	0.54	810	164	20/50	14.50	0.10	7.09	180
3*	75	3.00	76.2	3.44	87.5	0.59	15.1	0.76	1135	65/164	20/50	14.50	0.10	8.27	210
4*	100	4.00	101.6	4.53	115.0	0.65	16.4	1.32	1965	65/164	20/50	14.50	0.10	11.81	300
5	125	4.96	125.9	5.57	141.6	0.87	22.0	1.69	2520	65	20	14.50	0.10	13.78	350

The post Nagase RooTac TOTAKU General Suction SD-A2 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction Line ACE

kvt part2 — Sun, 26 Apr 2020 00:47:10 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Line ACE

Feature

This is a pressure-resistant type of SD hoses.
It is equipped with a reinforcement cord, providing an allowable pressure of 72.5 psi (0.50 MPa).
For diameters of 10 inches (φ250) and 12 inches (φ300), the allowable pressure is 36.3 psi (0.25 MPa).
Suitable for general discharge and suction use.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	2.01	51.0	2.15	54.5	0.25	365	16	5	1.02	0.007	-2.51	-8.5	4.72	120
2.5	65	2.66	67.5	2.81	71.5	0.30	445	16	5	1.02	0.007	-2.36	-8.0	5.51	140
3	75	2.99	76.0	3.15	80.0	0.35	520	16	5	1.02	0.007	-2.07	-7.0	6.30	160
4	100	4.04	102.5	4.17	106.0	0.42	630	16	5	1.02	0.007	-1.92	-6.5	8.27	210
5	125	5.02	127.5	5.16	131.0	0.51	755	16	5	1.02	0.007	-1.92	-6.5	9.84	250
6	150	5.98	152.0	6.10	155.0	0.62	925	16	5	1.02	0.007	-1.77	-6.0	11.81	300
7	175	6.95	176.5	7.09	180.0	0.71	1050	16	5	1.02	0.007	-1.48	-5.0	11.81	300
8	200	7.95	202.0	8.07	205.0	0.82	1225	16	5	1.02	0.007	-1.33	-4.5	15.75	400
10	250	9.96	253.0	10.08	256.0	1.04	1550	16	5	1.02	0.007	-0.89	-3.0	23.62	600
12	300	11.93	303.0	12.05	306.0	1.24	1840	16	5	1.02	0.007	-0.89	-3.0	23.62	600

The post Nagase RooTac TOTAKU General Suction Line ACE first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction SD-A

kvt part2 — Sun, 26 Apr 2020 00:44:35 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SD-A

Feature

The corrugated outer surface (with a smooth inner surface) ensures outstanding flexibility.
The completely transparent material makes it easy to monitor the internal fluids.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inch	mm
0.5	13	0.51	13.0	0.71	18.0	0.22	5.5	0.07	105	98	30	43.51	0.30	1.77	45
0.75	19	0.75	19.0	0.97	24.7	0.26	6.5	0.11	160	164	50	43.51	0.30	2.13	54
1	25	1.00	25.4	1.25	31.8	0.30	7.5	0.17	250	164	50	43.51	0.30	2.72	69
1.25	32	1.26	32.0	1.54	39.0	0.33	8.5	0.22	330	164	50	36.26	0.25	3.31	84
1.5	38	1.50	38.0	1.80	45.8	0.35	9.0	0.31	465	164	50	36.26	0.25	5.08	129
2	50	2.00	50.8	2.34	59.5	0.39	10.0	0.47	695	164	50	36.26	0.25	6.50	165
*	60	2.38	60.5	2.73	69.3	0.39	10.0	0.54	800	164	50	36.26	0.25	6.50	165
2.5	65	2.50	63.5	2.94	74.6	0.56	14.3	0.67	995	65/164	20/50	36.26	0.25	7.68	195
3*	75	3.00	76.2	3.51	89.1	0.59	15.1	0.94	1405	65/164	20/50	36.26	0.25	8.27	210
3.5*	90	3.51	89.1	4.17	106.0	0.64	16.2	1.48	2200	65/164	20/50	21.76	0.15	11.81	300
4*	100	4.00	101.6	4.63	117.6	0.65	16.4	1.66	2470	65/164	20/50	21.76	0.15	12.99	330
4.5*	115	4.50	114.3	5.19	131.8	0.72	18.4	1.84	2740	65	20	21.76	0.15	15.35	390
5	125	4.96	125.9	5.65	143.6	0.87	22.0	2.24	3330	65	20	21.76	0.15	15.94	405
6	150	6.00	152.4	6.77	172.0	0.87	22.0	3.04	4530	65	20	21.76	0.15	26.57	675
6.5*	165	6.50	165.2	7.26	184.5	0.91	23.0	3.19	4740	65	20	21.76	0.15	38.39	975
8	200	8.02	203.7	9.19	233.5	0.91	23.0	6.15	9150	32	10	21.76	0.15	41.34	1050

The post Nagase RooTac TOTAKU General Suction SD-A first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU General Suction SHIMETAC For Line ACE

kvt part2 — Sun, 26 Apr 2020 00:38:11 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: SHIMETAC for Line ACE

Feature

Lightweight due to resin construction
Rust-free because of resin material
High durability

Applicable Sizes

1 inch (φ25)*
1.5 inches to 4 inches (φ38 to φ100)

The post Nagase RooTac TOTAKU General Suction SHIMETAC For Line ACE first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses IT-13

kvt part2 — Sun, 26 Apr 2020 00:28:27 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: IT-13

Feature

Made with aluminum polyester cloth and galvanized steel sheet, suitable for use at temperatures up to 266°F (130°C).
Uses a special laminated film to reduce particle emission caused by surface abrasion.
Fully flexible and easy to expand and contract, simplifying storage, handling, and transport.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	2.01	51.0	2.15	54.5	0.25	365	16	5	1.02	0.007	-2.51	-8.5	4.72	120
2.5	65	2.66	67.5	2.81	71.5	0.30	445	16	5	1.02	0.007	-2.36	-8.0	5.51	140
3	75	2.99	76.0	3.15	80.0	0.35	520	16	5	1.02	0.007	-2.07	-7.0	6.30	160
4	100	4.04	102.5	4.17	106.0	0.42	630	16	5	1.02	0.007	-1.92	-6.5	8.27	210
5	125	5.02	127.5	5.16	131.0	0.51	755	16	5	1.02	0.007	-1.92	-6.5	9.84	250
6	150	5.98	152.0	6.10	155.0	0.62	925	16	5	1.02	0.007	-1.77	-6.0	11.81	300
7	175	6.95	176.5	7.09	180.0	0.71	1050	16	5	1.02	0.007	-1.48	-5.0	11.81	300
8	200	7.95	202.0	8.07	205.0	0.82	1225	16	5	1.02	0.007	-1.33	-4.5	15.75	400
10	250	9.96	253.0	10.08	256.0	1.04	1550	16	5	1.02	0.007	-0.89	-3.0	23.62	600
12	300	11.93	303.0	12.05	306.0	1.24	1840	16	5	1.02	0.007	-0.89	-3.0	23.62	600

The post Nagase RooTac TOTAKU Ducting Hoses IT-13 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses MD-45

kvt part2 — Sat, 25 Apr 2020 23:58:17 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: MD-45

Feature

Made entirely of stainless steel (SUS304) with excellent heat resistance, suitable for use at temperatures up to 842°F (450°C).
Resistant to corrosion from gases containing acids, alkalis, and solvents at room temperature.
Designed for fixed ducting but can be shaped to include bends. (Not suitable for repeated bending.)

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	2.07	52.5	2.20	56.0	0.25	365	6	2	1.02	0.007	-3.10	-10.5	6.69	170
2.5	65	2.64	67.0	2.81	71.5	0.31	460	6	2	1.02	0.007	-2.95	-10.0	8.27	210
3	75	2.99	76.0	3.15	80.0	0.35	525	6	2	1.02	0.007	-2.95	-10.0	9.45	240
3.5	90	3.60	91.5	3.74	95.0	0.38	570	6	2	1.02	0.007	-2.66	-9.0	11.42	290
4	100	4.04	102.5	4.17	106.0	0.43	635	6	2	1.02	0.007	-2.36	-8.0	12.60	320
5	125	5.02	127.5	5.16	131.0	0.52	780	6	2	1.02	0.007	-2.07	-7.0	14.96	380
6	150	6.00	152.5	6.10	155.0	0.62	930	6	2	1.02	0.007	-1.92	-6.5	16.54	420
7	175	6.95	176.5	7.09	180.0	0.69	1030	6	2	1.02	0.007	-1.92	-6.5	20.08	510
8	200	7.95	202.0	8.07	205.0	0.83	1240	6	2	1.02	0.007	-1.77	-6.0	22.44	570
10	250	9.96	253.0	10.08	256.0	1.06	1570	6	2	1.02	0.007	-1.33	-4.5	30.31	770
12	300	11.95	303.5	12.07	306.5	1.41	2100	6	2	1.02	0.007	-1.33	-4.5	36.22	920

The post Nagase RooTac TOTAKU Ducting Hoses MD-45 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses MD-25

kvt part2 — Sat, 25 Apr 2020 23:46:47 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: MD-25

Feature

Made with specially coated glass cloth and a reinforced core of stainless steel (SUS304), suitable for use at temperatures up to 482°F (250°C).
Freely expandable and contractible, making it easy to store, handle, and transport.
The specially coated glass cloth used offers excellent flame-retardant properties (Certified as Class 1 flame-resistant).
Suitable for hot air circulation devices and as suction ducts for welding sparks.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	2.01	51.0	2.15	54.5	0.24	360	16	5	1.02	0.007	-2.51	-8.5	4.33	110
2.5	65	2.64	67.0	2.81	71.5	0.32	480	16	5	1.02	0.007	-2.36	-8.0	5.51	140
3	75	2.99	76.0	3.15	80.0	0.35	525	16	5	1.02	0.007	-2.07	-7.0	6.30	160
3.5	90	3.58	91.0	3.72	94.5	0.37	545	16	5	1.02	0.007	-1.92	-6.5	7.48	190
4	100	4.04	102.5	4.17	106.0	0.43	635	16	5	1.02	0.007	-1.92	-6.5	8.27	210
5	125	5.02	127.5	5.16	131.0	0.52	770	16	5	1.02	0.007	-1.77	-6.0	9.84	250
6	150	6.00	152.5	6.12	155.5	0.61	910	16	5	1.02	0.007	-1.18	-4.0	11.02	280
7	175	6.95	176.5	7.09	180.0	0.78	1165	16	5	1.02	0.007	-1.18	-4.0	13.39	340
8	200	7.95	202.0	8.07	205.0	0.83	1240	16	5	1.02	0.007	-0.89	-3.0	14.96	380
10	250	9.96	253.0	10.08	256.0	1.06	1570	16	5	1.02	0.007	-0.89	-3.0	20.08	510
12	300	11.95	303.5	12.07	306.5	1.28	1905	16	5	1.02	0.007	-0.89	-3.0	24.02	610

The post Nagase RooTac TOTAKU Ducting Hoses MD-25 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses MD-18

kvt part2 — Sat, 25 Apr 2020 23:38:54 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: MD-18

Feature

Made with aluminum foil, glass cloth, and a reinforced core of galvanized steel sheet, suitable for use at temperatures up to 356°F (180°C).
Fully flexible and easy to expand and contract, simplifying storage, handling, and transport. (Repeated expansion and contraction should be avoided.)
Uses an aluminum-glass cloth sheet with superior flame-retardant properties. (Certified as Class 1 flame-resistant.)

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	2.01	51.0	2.15	54.5	0.27	405	16	5	1.02	0.007	-2.51	-8.5	4.33	110
2.5	65	2.66	67.5	2.81	71.5	0.35	520	16	5	1.02	0.007	-2.36	-8.0	5.51	140
3	75	2.99	76.0	3.15	80.0	0.39	580	16	5	1.02	0.007	-2.07	-7.0	6.30	160
3.5	90	3.58	91.0	3.74	95.0	0.42	630	16	5	1.02	0.007	-2.07	-7.0	7.48	190
4	100	4.04	102.5	4.17	106.0	0.48	720	16	5	1.02	0.007	-1.92	-6.5	8.27	210
5	125	5.02	127.5	5.16	131.0	0.58	860	16	5	1.02	0.007	-1.92	-6.5	9.84	250
6	150	5.98	152.0	6.12	155.5	0.71	1050	16	5	1.02	0.007	-1.77	-6.0	11.02	280
7	175	6.95	176.5	7.09	180.0	0.80	1185	16	5	1.02	0.007	-1.48	-5.0	13.39	340
8	200	7.95	202.0	8.07	205.0	0.94	1400	16	5	1.02	0.007	-1.33	-4.5	14.96	380
10	250	9.96	253.0	10.08	256.0	1.20	1780	16	5	1.02	0.007	-0.89	-3.0	20.08	510
12	300	11.93	303.0	12.07	306.5	1.41	2100	16	5	1.02	0.007	-0.89	-3.0	24.02	610

The post Nagase RooTac TOTAKU Ducting Hoses MD-18 first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Duct-AL

kvt part2 — Sat, 25 Apr 2020 23:30:54 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-AL

Feature

Offers flexibility and expandability, making installation in tight spaces easier.
Can compress to 1/5 of its original length, allowing for compact storage and saving on inventory space.
Resists repeated bending and provides excellent heat resistance (up to 176°F / 80°C).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch (when expanded)		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)		Maximum Operating Temperature
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm	°F	°C
1.5	38	1.54	39	1.77	45.0	0.43	10.8	0.08	125	16	5	2.90	0.020	-9.74	-33.00	1.18	30	176	80
2	50	1.97	50	2.18	55.3	0.43	10.8	0.11	160	16	5	2.90	0.020	-9.74	-33.00	1.38	35	176	80
2.5	65	2.52	64	2.77	70.3	0.43	10.8	0.13	195	16	5	2.90	0.020	-9.74	-33.00	1.77	45	176	80
3	75	2.95	75	3.16	80.3	0.43	10.8	0.16	235	16	5	1.45	0.010	-7.83	-26.50	2.17	55	176	80
4	100	3.86	98	4.15	105.3	0.43	10.8	0.20	300	16	5	1.45	0.010	-4.87	-16.50	2.76	70	176	80
4.5	117	4.45	113	4.70	119.3	0.43	10.8	0.24	360	16	5	1.45	0.010	-3.84	-13.00	2.95	75	176	80
5	125	4.92	125	5.13	130.3	0.43	10.8	0.25	375	16	5	1.45	0.010	-2.95	-10.00	3.54	90	176	80
6	150	5.91	150	6.13	155.7	0.43	10.8	0.39	580	16	5	1.45	0.010	-2.95	-10.00	4.13	105	176	80
7	175	6.89	175	7.11	180.7	0.43	10.8	0.45	670	16	5	1.45	0.010	-2.95	-10.00	4.72	120	176	80
8	200	7.87	200	8.10	205.7	0.43	10.8	0.53	785	16	5	1.45	0.010	-1.92	-6.50	5.91	150	176	80
10	250	9.84	250	10.07	255.9	0.43	10.8	0.77	1150	16	5	1.16	0.008	-1.92	-6.50	7.28	185	176	80
12	300	11.81	300	12.04	305.9	0.43	10.8	0.90	1345	16	5	1.02	0.007	-1.18	-4.00	9.06	230	176	80

The post Nagase RooTac TOTAKU Ducting Hoses Duct-AL first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Retractable Duct

kvt part2 — Sat, 25 Apr 2020 23:15:48 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Retractable Duct

Feature

Can expand and contract freely, with the ability to be fixed at any angle or direction. (Note: Shape retention may decrease for larger diameters.)
Reduces to 1/3 to 1/4 of its original length, facilitating easier transport and minimizing storage space before installation.
Suitable for hot air (below 176°F / 80°C) supply and exhaust.
Ideal for air conditioning and ventilation use.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch (when expanded)		Reference Weight		Length		Cyclic Durability	Bend Cycle Strength	Allowable Bend Radius (to the center axis of the hose)		Maximum Operating Temperature
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m			inch	mm	°F	°C
1.5	38	1.38	35	1.65	42.0	0.41	10.5	0.11	165	16	5	Over 100,000 cycles (32°F/0°C, 77°F/25°C)	Over 100,000 cycles (left and right 90°) (32°F/0°C, 77°F/25°C)	1.18	30	176	80
2	50	1.97	50	2.28	58.0	0.48	12.3	0.13	190	16	5			1.57	40	176	80
2.5	65	2.48	63	2.83	72.0	0.55	14.0	0.15	230	16	5			2.17	55	176	80
3	75	2.80	71	3.19	81.0	0.62	15.7	0.17	255	16	5			2.36	60	176	80
3.5	90	3.27	83	3.70	94.0	0.62	15.7	0.25	365	16	5			2.76	70	176	80
4	100	3.82	97	4.25	108.0	0.67	17.0	0.30	440	16	5			3.15	80	176	80
5	125	4.84	123	5.31	135.0	0.73	18.5	0.42	630	16	5			3.94	100	176	80
6	150	5.71	145	6.22	158.0	0.89	22.5	0.49	730	16	5			4.72	120	176	80
8	200	7.72	196	8.25	209.5	0.96	24.5	0.62	920	16	5			6.30	160	176	80
12	300	11.57	294	12.19	309.5	1.06	27.0	1.04	1555	16	5			9.45	240	176	80

The post Nagase RooTac TOTAKU Ducting Retractable Duct first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Rigid Duct-PP

kvt part2 — Sat, 25 Apr 2020 22:21:20 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-PP

Feature

Achieves a 10-20% weight reduction compared to traditional PVC products.
Can be freely bent and retains its shape after bending.
Diameter can be adjusted by twisting the end.
Easily cut with a knife.
Ducts can be quickly connected by twisting the ends together.
Can be incinerated after use.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch (when expanded)		Reference Weight		Length		Percentage Change in Diameter		Expansion-Contraction Ratio	Allowable Bend Radius (to the center axis of the hose)		Maximum Operating Temperature
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	Expansion	Contraction	–	inch	mm	°F	°C
2	55	2.17	55.0	2.39	60.8	0.28	7.0	0.30	450	32	10	20	15	1.5	5.51	140	176	80
2.5	65	2.56	65.0	2.79	70.8	0.28	7.0	0.34	510	32	10	20	15	1.5	6.10	155	176	80
3	75	2.95	75.0	3.24	82.4	0.30	7.5	0.45	675	32	10	20	15	1.5	6.89	175	176	80
3.5	90	3.54	90.0	3.83	97.4	0.30	7.5	0.52	775	32	10	20	15	1.5	8.27	210	176	80
4	100	3.94	100.0	4.23	107.4	0.30	7.5	0.57	845	32	10	20	15	1.5	9.06	230	176	80
5	125	4.92	125.0	5.23	132.8	0.30	7.5	0.79	1175	32	10	20	15	1.5	11.81	300	167	75
6	150	5.91	150.0	6.21	157.8	0.30	7.5	0.93	1380	32	10	20	15	1.5	13.78	350	167	75
7	175	6.89	175.0	7.20	182.8	0.30	7.5	1.20	1785	32	10	20	15	1.5	15.75	400	167	75
8	200	7.87	200.0	8.19	208.0	0.30	7.5	1.25	1855	32	10	20	15	1.5	17.72	450	167	75
10	250	9.84	250.0	10.22	259.6	0.41	10.5	2.15	3195	13	4	15	10	1.5	37.80	960	158	70
12	300	11.81	300.0	12.19	309.6	0.41	10.5	2.68	3990	13	4	15	10	1.5	39.37	1000	158	70

The post Nagase RooTac TOTAKU Ducting Hoses Rigid Duct-PP first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Duct-OR

kvt part2 — Sat, 25 Apr 2020 22:10:32 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-OR

Feature

Excellent oil resistance.
Matches equipment with its ivory color.
Lightweight with superior bending durability.
Low internal resistance, contributing to efficient and energy-saving operations.
Useful for the intake and exhaust of oil mist.
Effective for recovering oil mist from lathes, milling machines, and similar equipment.
Suitable for drainage purposes (for surface-level drainage).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
2	50	1.99	50.6	2.37	60.2	0.39	10.0	0.42	625	98	30	7.25	0.05	-19.49	-66.00	1.97	50
3*	75	3.01	76.4	3.40	86.4	0.51	13.0	0.52	775	98	30	5.80	0.04	-9.74	-33.00	2.95	75
4*	100	4.00	101.6	4.42	112.2	0.59	15.0	0.75	1120	98	30	4.35	0.03	-6.35	-21.50	3.94	100
5	125	4.96	125.9	5.46	138.7	0.83	21.0	0.91	1350	65	20	2.90	0.02	-5.91	-20.00	4.92	125
6	150	6.00	152.4	6.49	164.8	0.79	20.0	1.12	1670	65	20	2.90	0.02	-4.28	-14.50	5.91	150
8	200	8.00	203.2	8.52	216.5	0.89	22.5	1.47	2190	65	20	1.45	0.01	-1.77	-6.00	7.87	200

The post Nagase RooTac TOTAKU Ducting Hoses Duct-OR first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Duct-AROR

kvt part2 — Sat, 25 Apr 2020 22:02:05 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-AROR

Feature

Offers excellent abrasion and oil resistance.
In addition to abrasion resistance, it also offers superior anti-static properties (Material volume resistivity: 100,000 Ω·in / 10⁵ Ω·cm or less)
Ideal for transporting waste oil and scrap materials from metal processing.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
1.5	38	1.50	38.0	1.85	47.1	0.37	9.5	0.31	460	98	30	14.50	0.10	-19.49	-66.00	1.50	38
2	50	2.00	50.8	2.38	60.4	0.41	10.5	0.40	590	98	30	10.15	0.07	-19.49	-66.00	1.97	50
2.5	65	2.52	64.0	2.89	73.5	0.58	14.8	0.51	760	65	20	7.25	0.05	-19.49	-66.00	2.56	65
3*	75	3.01	76.4	3.44	87.4	0.59	15.1	0.65	960	98	30	7.25	0.05	-9.74	-33.00	2.95	75
4*	100	4.00	101.6	4.50	114.2	0.65	16.4	0.97	1440	65	20	4.35	0.03	-9.74	-33.00	3.94	100

The post Nagase RooTac TOTAKU Ducting Hoses Duct-AROR first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses BELLOWS Duct

kvt part2 — Sat, 25 Apr 2020 00:52:07 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: BELLOWS Duct

Feature

Can be expanded and contracted freely, allowing for storage at approximately one-third of its size.
Lightweight despite its large diameter, making it easy to transport.
Ideal for air supply and exhaust in manhole and tunnel construction work.
Effective for air supply, exhaust, and dust collection in various fields.
Suitable for drainage purposes (for surface-level drainage).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
14	350	13.78	350.0	14.45	367.0	1.97	50.0	2.71	4040	32	10	0.73	0.005	-0.40	-1.35	13.78	350
16	400	15.75	400.0	16.46	418.0	2.36	60.0	3.27	4860	32	10	0.58	0.004	-0.28	-0.95	15.75	400
18	450	17.72	450.0	18.46	469.0	2.36	60.0	3.71	5520	32	10	0.58	0.004	-0.28	-0.95	17.72	450
20	500	19.69	500.0	20.47	520.0	2.36	60.0	4.15	6180	32	10	0.44	0.003	-0.28	-0.95	19.69	500
22*	550	21.65	550.0	22.44	570.0	2.36	60.0	4.87	7250	32	10	0.44	0.003	-0.21	-0.70	21.65	550

The post Nagase RooTac TOTAKU Ducting Hoses BELLOWS Duct first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses HERAN Duct

kvt part2 — Sat, 25 Apr 2020 00:32:51 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: HERAN Duct

Feature

Offers more than twice the abrasion resistance compared to the PVC ducts.
Superior resistance to cold and heat. (Operating temperature range: -22°F to 176°F / -30°C to 80°C).
An anti-static duct hose with excellent static prevention properties. [Material volume resistivity: 3,937 Ω·in (10⁵ Ω·cm) or less]
Highly resistant to ozone cracking, unlike conventional rubber hoses.

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
1.5	38	1.50	38.0	1.84	46.8	0.37	9.5	0.23	335	98	30	4.35	0.030	-11.81	-40.00	1.77	45
2	50	1.99	50.6	2.41	61.2	0.39	10.0	0.37	550	98	30	4.35	0.030	-11.81	-40.00	2.17	55
2.5	65	2.46	62.4	2.87	73.0	0.47	12.0	0.41	605	98	30	2.90	0.020	-9.74	-33.00	2.56	65
3	75	3.01	76.4	3.43	87.2	0.51	13.0	0.49	725	98	30	2.90	0.020	-7.83	-26.50	2.95	75
3.5	90	3.50	88.9	3.95	100.3	0.53	13.5	0.60	890	98	30	1.45	0.010	-5.91	-20.00	3.54	90
4	100	4.00	101.6	4.45	113.0	0.59	15.0	0.63	935	98	30	1.45	0.010	-5.91	-20.00	3.94	100
5	125	4.96	125.9	5.50	139.7	0.85	21.5	0.88	1315	65	20	1.45	0.010	-4.87	-16.50	4.92	125
6	150	6.00	152.4	6.54	166.2	0.79	20.0	1.05	1560	65	20	1.45	0.010	-3.84	-13.00	5.91	150
8	200	8.02	203.7	8.56	217.5	0.89	22.5	1.39	2070	65	20	0.73	0.005	-3.84	-13.00	7.87	200
10	250	9.92	252.0	10.80	274.2	0.98	25.0	3.78	5620	32	10	0.73	0.005	-4.87	-16.50	13.78	350
12	300	11.93	303.0	12.92	328.2	1.18	30.0	4.13	6150	32	10	0.73	0.005	-4.87	-16.50	13.78	350

The post Nagase RooTac TOTAKU Ducting Hoses HERAN Duct first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Duct-FR

kvt part2 — Sat, 25 Apr 2020 00:20:03 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-FR

Feature

Features a reinforcing cord for superior tensile strength and outstanding flexibility and bending durability.
The ivory-white color transforms the look of traditional vinyl ducts, blending well with modern equipment.
Suitable for air supply and exhaust in equipment and machinery.
Ideal for air ventilation systems.
Effective for dust collection, air supply, and exhaust applications.
Suitable for drainage purposes (for surface-level drainage).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
1.25	32	1.26	32.0	1.57	40.0	0.33	8.5	0.20	300	164	50	14.50	0.10	-14.47	-49.00	1.26	32
1.5	38	1.50	38.0	1.82	46.2	0.35	9.0	0.27	400	164	50	14.50	0.10	-14.47	-49.00	1.50	38
2	50	1.99	50.6	2.40	61.0	0.39	10.0	0.45	665	98	30	11.60	0.08	-14.47	-49.00	1.97	50
2.5	65	2.46	62.4	2.86	72.6	0.47	12.0	0.49	730	98	30	10.15	0.07	-14.47	-49.00	2.56	65
3*	75	3.01	76.4	3.42	86.8	0.59	15.1	0.53	795	98	30	10.15	0.07	-11.81	-40.00	2.95	75
3.5*	90	3.50	88.9	3.91	99.3	0.59	15.1	0.64	950	98	30	10.15	0.07	-8.56	-29.00	3.54	90
4*	100	4.00	101.6	4.45	113.0	0.65	16.4	0.76	1135	98	30	10.15	0.07	-6.35	-21.50	3.94	100
5	125	4.96	125.9	5.48	139.3	0.83	21.0	1.10	1640	65	20	5.80	0.04	-5.91	-20.00	4.92	125
6	150	6.00	152.4	6.54	166.0	0.79	20.0	1.34	2000	65	20	4.35	0.03	-5.91	-20.00	5.91	150
8	200	8.02	203.7	8.56	217.5	0.89	22.5	1.85	2760	65	20	2.90	0.02	-3.25	-11.00	7.87	200

The post Nagase RooTac TOTAKU Ducting Hoses Duct-FR first appeared on Kouei Japan Trading | Get Quotation.

Nagase RooTac TOTAKU Ducting Hoses Duct-D

kvt part2 — Fri, 24 Apr 2020 23:33:21 +0000

Manufacturer: Nagase RooTAC Industries, Inc.
Model: Duct-D

Feature

Lightweight and flexible, improving handling and installation efficiency.
Easy to cut and install, simplifying ductwork.
Suitable for air supply and exhaust in equipment and machinery.
Ideal for air ventilation systems.
Effective for dust collection, air supply, and exhaust applications.
Suitable for drainage purposes (for surface-level drainage).

Standard Dimensions and Properties

Nominal Diameter		Inner Diameter		Outer Diameter		Pitch		Reference Weight		Length		Allowable Pressure (at room temperature)		Allowable Vacuum Pressure (at room temperature)		Allowable Bend Radius (to the center axis of the hose)
inch	mm	inch	mm	inch	mm	inch	mm	lbs/ft	g/m	feet	m	psi	MPa	inHg	kPa	inch	mm
1.25	32	1.28	32.4	1.52	38.6	0.30	7.5	0.17	255	164	50	8.70	0.06	-19.49	-66.00	1.26	32
1.5	38	1.47	37.3	1.75	44.5	0.31	7.9	0.24	360	164	50	8.70	0.06	-19.49	-66.00	1.50	38
2	50	2.00	50.8	2.35	59.8	0.43	11.0	0.37	545	164	50	7.25	0.05	-19.49	-66.00	1.97	50
2.5	65	2.52	64.0	2.88	73.2	0.44	11.1	0.46	685	98	30	5.80	0.04	-19.49	-66.00	2.56	65
3*	75	3.01	76.5	3.38	85.9	0.46	11.7	0.55	825	98	30	5.80	0.04	-9.74	-33.00	2.95	75
3.5*	90	3.54	90.0	3.94	100.0	0.47	12.0	0.71	1050	98	30	4.35	0.03	-9.74	-33.00	3.54	90
4*	100	4.06	103.0	4.45	113.0	0.47	12.0	0.84	1245	98	30	4.35	0.03	-6.64	-22.50	3.94	100
5	125	5.01	127.3	5.41	137.3	0.48	12.1	0.97	1445	65	20	2.90	0.02	-3.54	-12.00	4.92	125
6	150	5.96	151.4	6.38	162.0	0.53	13.5	1.23	1830	65	20	2.90	0.02	-2.95	-10.00	5.91	150
7	175	6.95	176.6	7.39	187.8	0.54	13.7	1.46	2170	65	20	1.45	0.01	-2.36	-8.00	6.89	175
8	200	8.07	205.0	8.54	216.8	0.56	14.3	1.85	2760	65	20	1.45	0.01	-1.92	-6.50	7.87	200
10	250	9.93	252.1	10.39	263.9	0.55	13.9	2.21	3290	32	10	1.45	0.01	-1.18	-4.00	9.84	250
12	300	11.93	303.0	12.44	316.0	0.62	15.7	2.75	4090	32	10	1.45	0.01	-0.74	-2.50	11.81	300

The post Nagase RooTac TOTAKU Ducting Hoses Duct-D first appeared on Kouei Japan Trading | Get Quotation.