Japan, Kaneko Sangyo
Kaneko Sangyo M15G Series Four-Way Solenoid Valve (Single)
Manufactuer: Kaneko Sangyo
Model: M15G Series
Summary
Mainly, there are five pipe connecting port, four-way solenoid valve, has become a place 2 1 inlet, 2 outlet, outlet. Because it is always closed, the exhaust port directs one of the four functions.
A single solenoid has one coil inside and switches to its original state when energized. The flow direction changes when the solenoid is activated during a power outage or blackout.
Feature
The internal sliding parts are extremely slippery due to the hard-anodized coating, providing excellent abrasion resistance and preventing stick-slip operation, even without lubrication.
Made from aluminum alloy, the main parts are very small and light.
You can easily replace the AC and DC coils as both fit into the same casing.
Corrosion treatment with hard anodized coating makes it very strong and corrosion-resistant.
The product is flameproof, tested and approved by the Ministry.
The main valve functions without a spring, actuated by a piston, preventing malfunctions even after long periods of inactivity. It operates on an off-balance spool type.
With manual buttons, you can check or test the operation.
A minimum operating pressure of 0.1 MPa ensures reliable operation without earos.
You can use it as a three-way valve by selecting the port in the form of port 5.
Standard specification
- FLUID : CLEAN AIR
FLUID TEMPERATURE : -20~60℃
AMBIENT TEMPERATURE: -20~60℃
DUTY CYCLE: 100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE: +10,-15%
WORKING PRESSURE : 0.1 ~ 0.99MPa
Cv. FLOW FACTOR: 0.87
ELECTRICAL SPECIFICATIONS: See below
STANDARD VOLTAGE
AC | DC | |||
---|---|---|---|---|
V/Hz | INRUSH A | HOLDING A | V | A |
GENERAL PURPOSE TYPE 12PG, EXPLOSION-PROOF TYPE E12PU | COIL INSULATION CLASS:H | |||
100/50 | 0.27 | 0.16 | 24 | 0.33 |
100/60 | 0.25 | 0.13 | 48 | 0.15 |
110/60 | 0.25 | 0.15 | 100 | 0.072 |
200/50 | 0.14 | 0.08 | 110 | 0.08 |
200/60 | 0.13 | 0.07 | 125 | 0.06 |
220/60 | 0.13 | 0.08 |
Product Image
M15G GENERAL PURPOSE TYPE
M15G-8~10 GENERAL PURPOSE TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 60 | 123 |
10 | 60 | 123 |
M15G EXPLOSION-PROOF TYPE
M15G-8~10 EXPLOSION-PROOF TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 60 | 138 |
10 | 60 | 138 |
M15G HYDROGEN EXPLOSION-PROOF TYPE
M15G-8~10 HYDROGEN EXPLOSION-PROOF TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 60 | 156 |
10 | 60 | 156 |
M15G DUST EXPLOSION-PROOF TYPE
M15G-8~10 DUST EXPLOSION-PROOF TYPE | ||
---|---|---|
NOMINAL DIAMETER | MOUNTING LENGTH | H |
8 | 60 | 190 |
10 | 60 | 190 |
DESCRIPTION OF OPERATION
Related Products
-
Kunimoto 1846223 KS Temporary Landing Safety Pole Set B
-
Ross Asia 21 Series Directional Control Valves, Explosion Proof and ATEX Low temperature, 2/2, 3/2, 4/2 functions
-
Sawada KS9S type Gauge valves for level gauge
-
NOHMI BOSAI N765 Addressable Systems
-
TONE GST51T/GST52T Nut Runner (Simple Torque Converter GST Type)
-
Kikusui Tape 201L Double-Coated Glue Tape