,

Kanetec KMD-F Inverter Controlled Demagnetizer

Product Made in Japan
Manufacturer: Kanetec
Model: KMD-F

Less power and enhanced demagnetizing performance!

Application

This model is designed to generate an alternating magnetic field on the surface by an AC power source, where workpieces are passed to eliminate the magnetism remaining on the surface of workpieces.

Features

  • Demagnetization is carried out by varying (sweeping) a frequency lower than commercial frequencies from a lower point to a higher point. This model has improved the demagnetizing performance without increasing the amount of electricity to use.
  • The demagnetizing part is of the same dimensions as the conventional table type demagnetizer (KMD-C). With the same output current (AC effective value) as conventional models, the residual magnetism in workpieces (SKH material) can be reduced to one third.
  • Workpieces are demagnetized by passing them over the demagnetizing surface at a constant speed, as with conventional models.
  • Continuous power on specification, but heat generated in the demagnetizing part is less than conventional models.
  • A demagnetizing output variable resistor is provided on the electrical unit that can vary the output current (AC effective value) in a range of 100% and 70%. This feature achieves demagnetization of low-carbon steels like S45C by less power (70%) than conventional models.

[mm(in)]

Model
Power Source
Power
Capacity
Output
Working Rate
Effective Demag. Width
Dimensions
Mass
Width Length Height
Demagnetizing section KMD-F20
Single-phase 100 VAC,
50/60 Hz
200VA(2.7A)
MAX5A ±20V
100% ED
130(5.11) 200 (7.87) 120 (4.72) 80 (3.15) 6.5kg/ 14 lb
Electrical unit EHD-20A ̶ 140(5.51) 175(6.89) 260(10.2) 4.5kg/ 9.9 lb
Demagnetizing section KMD-F30
Single-phase 200 VAC,
50/60 Hz
400VA(3.4A)
MAX7.5A ±30V
100% ED
180(7.08) 300 (11.8) 200 (7.87) 120 (4.72) 21.0kg/ 46 lb
Electrical unit EHD-30A ̶ 220(8.66) 175(6.89) 290(11.4) 5.8kg/ 13 lb

The main unit is provided with a 2 m cable.


Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top