, ,

Kanetec RH-MW / KR-A / KR-P Rectifier For Electromagnetic Lifma

Products Made in Japan
Manufacturer: Kanetec
Model: RH-MW / KR-A / KR-P

Application

These units rectify AC power to DC and supply it to electromagnetic Lifma. All electromagnetic Lifmas require a rectifier. Three models are available; KR-P, A, RH-MW. Select them according to your purpose of usage.

RH-MW 《Rectifier with reverse exciting circuit》
(for holding release)

When the power supply is turned OFF, workpieces with flat lifting surfaces or those made from materials that tend to retain residual magnetism may require a reverse current flow to cancel the residual magnetism and achieve complete release.

Features

You can vary the DC voltage within a range of 0 to 180V.
We provide external control input terminals.
We have incorporated an over voltage protection function.

Precaution for use

  • The rectifiers KR Series and RH Series do not use electronic PC boards and small relays inside. Therefore, they are not suitable for use, for example, on cranes subject to constant vibrations. You need to provide anti-vibration measures for installation in such places. Limit the external signal input cables to a maximum length of 10 m, using shielded cables.
  • We may not be able to answer technical questions for failures resulting from the use of lifting magnets made by other manufacturers. Such use also voids the warranty, even if a failure occurs within the warranty period.

Model Input Output Dimensions Remote Switch Ammeter Demag. Function Mass
Voltage Current Capacity Width Depth Height
KR-P203 Singlephase 200 VAC, 50/60 Hz 180 VDC 3A 540W 200 (7.87) 90 (3.54) 250 (9.84) o x x 3 kg/ 6.6 lb
KR-P208 8A 1440W
KR-A203 3A 540W x o x
KR-A208 8A 1440W
RH-MW205B 0-180 VDC 5A 900W 140 (5.51) 175 (6.89) 260 (10.2) x o (Demag.) 4.5kg/ 9.9 lb
RH-MW210B 10A 1800W 282 (11.1) 290 (11.4) 6kg/ 13.2 lb

Kouei is Distributor/Agent of Kanetec.
Other items of Kanetec
Request the quotation for Kanetec

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top