Japan, Kitagawa
KITAGAWA TBX series NC Rotary Table
Made in Japan
Manufacturer: Kitagawa
Model: TBX Series
Feature:
High performance range with back mounted motor to reduce interference with machining area
High rigidity for heavy cutting
High accuracy
Built-in air-hydraulic booster provides high clamping torque.
Air-hydraulic booster or direct hydraulic clamping option available
Rotary joint available
*CE correspondence
Specification
| Model | TBX160 | TBX200 | TBX250 | TBX320 | ||
|---|---|---|---|---|---|---|
| Table Diameter (mm) | ø165 | ø200 | ø250 | ø320 | ||
| Centre Hole Diameter (mm) | ø50H7 | ø75H7 | ø105H7 | ø135H7 | ||
| Through Hole Diameter (mm) | ø40 | ø52 | ø78 | ø110 | ||
| Centre Height (mm) | 120 | 140 | 180 | 225 | ||
| Clamping Method | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | Air-hydraulic / Hydraulic | ||
| Clamping Torque (N･m) (at pneumatic 0.5MPa /hydraulic 3.5MPa) |
450 | 600 | 1100 | 2600 | ||
| Motor Axis Reduced Inertia (kg･m2) | 0.00032 | 0.00087 | 0.00112 | 0.00147 | ||
| Servomotor (for Fanuc spec.) |
αiF 2/5000-B | αiF 4/5000-B | αiF 4/5000-B | αiF 8/3000-B | ||
| Total Reduction Ratio | 4th axis spec. (Fanuc spec.) |
1/72 | 1/90 | 1/90 | 1/120 | |
| M signal spec. | 1/72 | 1/90 | 1/90 | 1/180 | ||
| Max. Rotation Speed (min-1) |
4th axis spec. (Fanuc spec.) |
41.6 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
25 (at motor 3000min-1) |
|
| M signal spec. | 41.6 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
33.3 (at motor 3000min-1) |
16.6 (at motor 3000min-1) |
||
| Allowable Work Inertia (kg･m2) | 0.26 (0.52) Note) | 0.50 (1.00) Note) | 0.98 (1.96) Note) | 2.24 (4.48) Note) | ||
| Indexing Accuracy (sec) | 20 | 20 | 20 | 20 | ||
| Repeatability (sec) | 4 | 4 | 4 | 4 | ||
| Mass of Product (kg) | 66 | 74 | 135 | 220 | ||
| Allowable Load | Vertical (kg) | 80 (160) Note) | 100 (200) Note) | 125 (250) Note) | 180 (320) Note) | |
| Manual Tailstock (as an option) |
TS160RN | TS200RN | TS250RN | TS320RN | ||
| Tail Spindle (as an option) | TSR121A | MSR142A/ TSR142A |
MSR181A/ TSR181A |
TSR181A45 | ||
Related Products
-
Kyowa PG-1TH PG-H Pressure Transducer
-
Kyowa LCW-D-3MNS LCW-D-S Washer-type Load Cell
-
Kakuta Variclamp No.1SB Hold Down Clamp
-
Chiyoda Tsusho Sleeve Connector Nipple
-
Kitz 150UNAJ,150UNAJM Stainless & High Alloy Class 150 Jacketed Lift Check Valve
-
Okazaki Seiko SHE6H OK-HARD Coated Solid Carbide Hard Square Endmills Regular Shank (6 Flutes)
REQUEST QUOTATION
PAYMENT
LINK
