Japan, Naniwa
Naniwa Forged Wing Nut
Product Made in Japan
Manufacturer : Naniwa
Model: Forged Wing Nut
Dimension drawing
Material: SS400(Unit:mm)
|
Nominal Size
|
A | B | C | D | |
| Minimum | Approximately | Minimum | Standard Dimension | Tolerance | |
| M12 | 22 | 18 | 12 | 60 | ±2.0 |
| M16 | 26 | 22 | 14 | 70 | ±2.0 |
| M20 | 34 | 28 | 18 | 90 | ±2.5 |
|
Nominal Size
|
H | G1 | G2 | |
| Standard Dimension | Tolerance | Maximum | Maximum | |
| M12 | 30 | ±1.5 | 7 | 8 |
| M16 | 35 | ±2.0 | 8 | 9 |
| M20 | 45 | ±2.0 | 9 | 11 |
Material: SUS304 (Lost Wax Process)(Unit:mm)
|
Nominal Size
|
A | B | C | D | |
| Minimum | Approximately | Minimum | Standard Dimension | Tolerance | |
| M6 | 12 | 9 | 10 | 31.8 | ±2.0 |
| M8 | 15 | 13 | 10 | 40 | ±2.0 |
| M10 | 19 | 16 | 14 | 50 | ±2.0 |
| M12 | 23 | 18 | 15 | 59.5 | ±2.0 |
| M16 | 27 | 24 | 17 | 69.7 | ±2.0 |
|
Nominal Size
|
H | G1 | G2 | |
| Standard Dimension | Tolerance | Maximum | Maximum | |
| M6 | 18 | ±1.5 | 4 | 5 |
| M8 | 20.7 | ±2.0 | 4.5 | 5.5 |
| M10 | 25.8 | ±2.0 | 5.5 | 6.5 |
| M12 | 29.6 | ±2.0 | 7 | 8 |
| M16 | 34.8 | ±2.0 | 8 | 9 |
Related Products
-
Hammer Caster 215SOE 50-75mm Stainless Steel Corner Caster
-
Daiichi Keiki SC Series Contact Pressure Gauge
-
DIJET SEHM Type One-Cut 70 End Mill
-
Gentos Ganz Series GZ-BA30 Hazard Zone Work Light (300 lumens)
-
KONAN MVS300K/MVD300K Series 3-Port Solenoid Valves Pressure Resistant Packing Hold Type
-
IIZUKA CHV Transformer in case
REQUEST QUOTATION
PAYMENT
LINK
