Japan, Obishi Keiki
Obishi Keiki Seisakusho Precision V Block with Tungsten Carbide
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Stock No :327
- Accuracy of all products is Grade A
- 2 blocks make up one set. Parallelism of base and V groove of the 2 blocks is assured.
- In order to maintain the V groove wear resistance, carbide sheet is pasted on it.
- All size are hardened, and V Groove is 90 degrees.
*According to your requirement, we also manufacture special measurement products.
Code No. | Nominal Measurement |
Measurement (L×H×W×Vmm) |
Base and V Groove Parallelisms |
Mass (kg/Set) |
---|---|---|---|---|
JB101 | 50 | 50×28×22×19 | 3μm | 0.4 |
JB102 | 75 | 75×50×35×39 | 2.0 | |
JB103 | 100 | 100×60×38×43 | 3.5 | |
JB104 | 125 | 125×70×45×57 | 6.0 | |
JB105 | 150 | 150×90×60×67 | 13.0 |
Related Products
-
Saitamaseiki AK-83HP Polishers
-
Japan Clamp AP Lifting Clamp (Double Hole)
-
Chiyoda Seiki KR-120HS/KR-120HS-H (Primary pressure: 15.0 MPa or less / Adjusted pressure 2.0 to 12.0 MPa)
-
UHT Corporation CS40-4 #600 Black Ceramic Stones
-
Kyowa CANTERM 120 TERMINATION RESISTOR NTB-500C Medium Speed Network Terminal Box
-
Kyowa LCR-G-10KNSA2 LCR-G-SA2 Small-sized Large-capacity Compression Load Cell