Field Equipment, Japan
OSC483FO105 Ground Water Level Indicator

Model: OSC483FO105
Features
– It is a portable device determined for the measurements of the groundwater level in the bores.
– The device comprises the sensor, cable roll, cable length measuring unit and the basement.
– The electronics are located in the center of the cable roll.
– For measuring the device is supported on the bore or the supportive stand nearby the bore.
– The device may be held also in hand. After the counter of the table
– After the counter of cable length measuring unit is cleared by pushing the lever at the right side of the counter the cable with the sensor is led into the bore.
– At the same time, the cable must go through the cable length measuring unit.
– If the sensor reaches the water the electrical signal will switch in the light and the sound signals.
– The reading of the counter corresponds to the level of the groundwater in the bore.
– The cable length measuring unit has two counting modes: adding pulling the cable down out of the cable roll and subtracting pulling it back in reversed direction.
– This makes measuring especially comfortable.
– The cable roll is equipped with the handle to facilitate the cable rewinding.
– For transport, the Ground Water Level Indicator is placed into the bag.
Specifications
Model | OSC 483FO 105 |
Counter measuring unit | 1cm |
Counter range | 999.99m |
Cable length registration accuracy | ±1cm |
Cable length | 30 to 200m (depending on the other) |
Max measuring speed | 60m/ min |
Sensor diameter | 15mm |
Operating voltage | 12V DC |
Working temperature | -5℃ to +40℃ at 100% relative humidity |
Related Products
-
Motoyuki GA For thin, non-ferrous metal cutting
-
NAC – AL TYPE 10 Steel (Chrome-plated) PB (Polyurethane coil tube connection)
-
Kitz EN16FCL/EN16FCLM PN16 Iron Gate Valve
-
SAKUSAKU TNGG160404-R Turning Insert 60° Triangular/Negative
-
Matsumoto Kikai STP-1000 ~ 3000 Air Clamp Seamer
-
Wasino Kiki Various Options for Sight Glass