Japan, Royal Master
Royal Master 706NSW Hydraulic Pump Unit – Hydraulic Puncher

Made in Japan
Manufacturer: Royal Master
Model: 706NSW
Feature
All units, from small, lightweight models to powerful types, are chosen by our customers for their excellent operability.
Standard models are used to punch long holes. Long hole bits are also standardized and we have a large inventory. *
Combined with Royal’s powerful double-acting hydraulic pump, these punching machines punch holes quickly, accurately, safely and quietly. **
The new 506NSW, a chisel for small section steel, with a 5。 taper for channel steel is standard in stock.
*Long holes are an option for 1150SW only.
** The noise is generated when the steel material is very hard.
Technical note:
When making holes with these punches, the hole diameter should be larger than the material thickness (SS400).
Specifications
Maximum capacity | 450kN (45 tons) |
Maximum capacity (ss400) | 24×16 25×15 |
Stretch | 60mm |
Weight | 21kg |
Use hydraulic pump | 70Mpa(720kgf/cm2) Double-acting type |
Accessory | 11, 14, 18, 24 |
Maximum punching speed (Classified by pump/punch combination)
awl | 706NSW | ||
Time (seconds) | Punch | Return | |
Hyd. pump | D-3SW | 1.6 | 0.9 |
D-2SW | 2.5 | 1.3 | |
D-1SW | 4.0 | 1.3 | |
1SW-40 | 10.1 | 5.0 |
Related Products
-
H.H.H Stainless Wire Rope (Bobbin Wound)
-
Eisen ECT Series Center Hole Pin Gauge Set
-
Watanabe AM-756 Digital Panel Meter for DC voltage/current (48 x 96 mm, 5 + 1/2 digits) – DC Meter
-
TONE WS-R Series Top Chest
-
Ross Asia SV27 series Pilot operated check valve for external monitoring Safety cat. 2PLc
-
TERAOKA SEISAKUSHO 560S #2 Nomex(R) Adhesive Tape