Japan, Toho Seisakusho
Toho Seisakusho MS Series Continuous Rating Control Motor
Product Made in Japan
Manufacturer: Toho Seisakusho
Model: MS Series
MS-6 type (without manual handle)
MSH-6,10,20 type (with manual handle)
MSHT-10, 20 type (with manual handle and torque limit switch)
Manual handle equipment allows manual operation without a clutch, and has a special structure that prevents the handle from rotating during electric operation, making it easy to handle. Those with a torque limit switch automatically stop the control motor during overtorque, making it easier to operate equipment and equipment. Protection from failure
On/off control (B) and proportional action (C, CX, CE, E) are standardized. – 135Ω signal (electrical type) can be directly input to proportional action type/built-in balancing relay (CX) – Proportional action type/electronic positioner Built-in (CE) can directly input DC4 to 20mA, DC1 to 5V or DC0 to 10V signals (electronic/DDC).
*All models use extreme pressure lubricating grease, so there is no need for regular lubrication.
* Explosion-proof type is also available. *We can accommodate custom specifications other than those listed above, so please contact us.
Specification
| Format | MS(H)-6 type control motor MSH(T)-10 type control motor MSH(T)-20 type control motor |
|||
|---|---|---|---|---|
|
Output torque
|
MS(H)-6 | 60 N・m | ||
| MSH(T)-10 | 100 N・m | |||
| MSH(T)-20 | 200 N・m | |||
| Rated voltage | AC100/110V, AC200/220V±10% (50/60Hz) *For MSH(T)-20 type, the allowable ambient temperature changes due to voltage fluctuations. |
|||
| Output shaft rotation angle | 90° | |||
| Operating time (90°) | 60/50s (50/60Hz) | |||
| Control operation | B: 2-position/3-position operation C, CX, CE, E: Proportional operation |
|||
|
Power consumption
|
Format | B,C,E | CX,CE | |
| MS(H)-6 | max. 28VA | max. 31VA | ||
| MSH(T)-10 | max. 60VA | max. 69VA | ||
| MSH(T)-20 | max. 110VA | max. 113VA | ||
| Motor type | Single-phase capacitor motor with brake, Class E insulation, continuous rating, built-in thermal protector |
|||
| Signal contact | B type only, SPST x 2 (ON when fully open, ON when fully closed) Contact capacity AC125/250V 10A (non-inductive load) |
|||
| Input signal | CX: 135Ω potentiometer 3-wire connection CE: DC4~20mA, DC1~5V or DC0~10V | |||
| Protective structure | IP55 | |||
| Material | Case: aluminum alloy | |||
| Allowable range temperature | B, C, E type: -20~+60℃ CE, CX type: -10~+50℃ *For MSH(T)-20 type, please use within voltage fluctuation value +5% at 110V and 220V. |
|||
| Paint color | Munsell N5 | |||
| Mass | MS(H)-6: Approx. 7kg MSH(T)-10: Approx. 15kg MSH-20: Approx. 22kg MSHT-20: Approx. 25kg | |||
Related Products
REQUEST QUOTATION
PAYMENT
LINK
