UNIKA DC – Diamond Core Drill | Kouei Japan Trading

UNIKA DC – Diamond Core Drill

Manufacturer: UNIKA
Model: DC type (ST-Shank set)/ DC type (SDS-Shank set)/ DC type (body)/ DC type (Lubricate Shank)/ DC type (Extention Shank)/ DC type (Center Pin)/ DC type (L-type Stopper)

■Drill reinforced concrete (up to 10mm-reinforced) with hardly any impact, low noise, and low load.
■Easy-to-use center pin system enabling simple center positioning.
◆Effective Length: 50mm(Dia:29-38mm)/130mm(Dia:50-120mm)
◆Matching drill: Electric drill/Percussion drill(rotating mode)

Dimensional Drawing

USES

Concrete•Stone•Resin-bassed artificial marble•Mortar•Hard exterior panel•Block•Brick•Slate•
Roof tile•Porcelain tile•Ceramic tile•Soft exterior panel

■Appropriate motor

■Power consumption: 500 W or more
■Rotation speed: 1,000 – 1,400 rpm

Diamond burns and carbonized at high temperatures. Water must be provided during drilling operations to cool the diamond tip.
Make sure to remove the center pin once the drilling point is positioned.
Avoid cutting the reinforcement wherever possible since it relates to the strength of the structure.

■Handling Procedure

Handling Procedure

Align the center pin with the drilling position. Hold it tight and turn on the motor switch. [Rotation mode]
Stop the motor when the cutting edge is inserted approximately 5 mm and remove the center pin.
Lightly press the body against the drilling groove and continue operation.

SPECIFICATION

DC type (ST-Shank set) DC type (SDS-Shank set)

Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)
DC-29S	29	DC-70S	70	DC-29SDS	29	DC-70SDS	70
DC-32S	32	DC-75S	75	DC-32SDS	32	DC-75SDS	75
DC-35S	35	DC-80S	80	DC-35SDS	35	DC-80SDS	80
DC-38S	38	DC-100S	100	DC-38SDS	38	DC-100SDS	100
DC-50S	50	DC-110S	110	DC-50SDS	50	DC-110SDS	110
DC-60S	60	DC-120S	120	DC-60SDS	60	DC-120SDS	120
DC-65S	65			DC-65SDS	65

DC type (Body) DC type (Lubricate Shank)

Size	Diameter(mm)	Size	Diameter(mm)	Size	Length(mm)
DC-29B	29	DC-70B	70	DS-1	118
DC-32B	32	DC-75B	75	DS-SDS	142
DC-35B	35	DC-80B	80
DC-38B	38	DC-100B	100
DC-50B	50	DC-110B	110
DC-60B	60	DC-120B	120
DC-65B	65

DC type (Extention Shank) DC type (Center Pin) DC type (L-type Stopper)

Size	Length(mm)	Size	Length(mm)	Size	JAN Code
DWP-No.0	207	DLS-220	220	DC-L	4.98927E+12
DWP-No.1	187

Drilling And Cutting, Japan, Unika