Japan, Yutani
Yutani ETC Wrench Control System
Product Made in Japan
Manufacturer: Yutani
Model: ETC
Intelligent Fastening System with High Quality Fastening and Low Cost!!
Features of Controller:
- Controls two wrenches used at random with only one controller.
- Can be applied to various and complicated fastenings with 7 fastening patterns and 10 steps program.
- Controls accurately torque and the number of fastenings.
- Always checks system problem with built-in programs.
- Checking problem in fastening by Yutani’s sophisticated software Kajiri.
- Transmits fastening data to a computer or printer.
- Saving space & cost.
System Diagram
ETC Wrench
Air pressure 0.49MPa
| Class | Shape | Model | Capacity (Bolt dia.) mm |
Applicable torque Nm |
Free speed min-1(rpm) |
Square drive size mm |
Mass kg |
Overall length mm |
Dimension from the shaft center to the outside mm |
Air consumption Nm3/min |
Air inlet Re(PT) |
Hose diameter mm |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Wrenches
|
Pistol
|
ETC-10H | 5~6 | 7.8~14.7 | 2,600 | 9.5 | 1.6 | 185 | 24.5 | 0.5 | 1/4 | 9.5 |
| ETC-15H | 6~10 | 14.7~33.3 | 2,300 | 9.5 | 1.9 | 188 | 28.5 | 0.6 | 1/4 | 9.5 | ||
| ETC-60H | 10~12 | 49.0~78.4 | 2,000 | 12.7 | 2.3 | 218 | 30.0 | 0.7 | 1/4 | 9.5 | ||
| ETC-100H | 12 | 78.4~118 | 1,500 | 12.7 | 2.7 | 230 | 30.0 | 0.7 | 1/4 | 12.7 | ||
| ETC-120H*1) | 12~14 | 78.4~130 | 2,400 | 12.7 | 4.0 | 303 | 35.0 | 0.7 | 1/4 | 12.7 | ||
| ETC-200H*2) | 14~16 | 170~220 | 2,300 | 12.7 | 6.0 | 326 | 41.0 | 0.9 | 3/8 | 12.7 | ||
|
Straight
|
ETC-5HS | 4~5 | 6.8~7.8 | 2,300 | 9.5 | 1.3 | 262 | 22.0 | 0.5 | 1/4 | 9.5 | |
| ETC-10HS | 5~6 | 7.8~14.7 | 2,800 | 9.5 | 1.5 | 268 | 22.2 | 0.6 | 1/4 | 9.5 | ||
|
Drivers
|
Pistol
|
ETC-10HD | 5~6 | 7~13.2 | 2,600 | HEX 6.35 | 1.7 | 195 | 24.5 | 0.5 | 1/4 | 9.5 |
| ETC-15HD | 6 | 13.2~26.5 | 2,300 | HEX 6.35 | 1.9 | 198 | 28.5 | 0.6 | 1/4 | 9.5 | ||
|
Straight
|
ETC-5HSD | 4~5 | 6.1~7 | 2,300 | HEX 6.35 | 1.3 | 267 | 22.0 | 0.5 | 1/4 | 9.5 | |
| ETC-10HSD | 5~6 | 7~13.2 | 2,800 | HEX 6.35 | 1.5 | 273 | 22.2 | 0.6 | 1/4 | 9.5 |
*1) *2) Reactionless Wrench
YSC Controllers
|
Model |
YSC-3A | YSC-3C | YSC-3B |
YSC-3D |
|
|---|---|---|---|---|---|
|
Number of wrenches controlled |
1 |
2 |
|||
|
Main Function |
Control Torque
Control the number of fastenings. |
||||
|
Preset items (preset range) |
Torque (0-9999N/m): Snag torque, Lower limit torque, control torque, upper limit torque, Kajiri torque, torque at which rotation speed changes from low to high in loosening/fastening workpiece. | ||||
| Time (0.0-99.9sec): Maximum fastening time for one fastening / one fastening workpiece | |||||
| Time (0-999min): Maximum fastening time for a fastening group. | |||||
| Number of fastening(0-999999times): Number of fastening for a fastening workpiece. Number of fastening limit. | |||||
| Fastening group(A-G): A series of fastening jobs. A fastening group consists of 10 fastening steps. | |||||
| Fastening step (1-10): A fastening step is a series of fastening jobs defined as the same fastening workpiece and assigned to a specific fastening workpiece | |||||
| Fastening workpiece (1-7): A series of fastening jobs done with a set of preset figures. | |||||
|
Number of air pressure preset |
7 | 256 | 7 | 256 | |
| Display | LCD display | Preset items and preset figures | |||
| Fastening resuits: Fastening torque, Snag Torque, Fastening time, Number of fastening in a group, Total number of fastenings, Calendar | |||||
| LED display | Fastening results: Torque NG (Red), Torque OK (Green), Ready for operation (Green). Warning for approaching the limit of the number of fastening (yellow), Limit over the number of fastening (Red), Problem on wrenches or controller (Red) | ||||
|
Power Supply |
AC100V 50/60HZ | ||||
|
Size |
250(W)x105(H)x200(D)mm | 250(W)x136(H)x254(D)mm | 250(W)x136(H)x210(D)mm | 250(W)x136(H)x254(D)mm | |
|
Mass |
4.5kg | 6.0kg | 5.3kg |
6.2kg |
|
Kouei is Distributor/Agent of Yutani
Other items of Yutani
Request the quotation for Yutani
Related Products
REQUEST QUOTATION
PAYMENT
LINK
