Fukuda Seiko, Nhật Bản
Fukuda Seiko 4TE Dao Phay Đầu Côn 4 Me – Tapered End Mill 4 Flute
Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: 4TE
Mô tả
- Là loại dao phay được sử dụng để gia công góc thoát khuôn. Bằng cách sử dụng một lưỡi xoắn đều, có thể thu được độ sắc nét ổn định và độ chính xác xử lý cao.
- Chất liệu: HSS-Co (SKH56)
- Góc nghiêng me: Xoắn phải 25°
- Dung sai góc: ±5′
- Dung sai đường kính đầu mũi: 0 đến -0,05
* Cắt trung tâm
Bản vẽ kỹ thuật
Thông số kỹ thuật
■ Tapered edge end mill 4-flute (single angle 0°30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
0゚30′ | *3 | 3.26 | 15 | 61 | 6 |
4 | 4.35 | 20 | 66 | ||
5 | 5.44 | 25 | 71 | ||
6 | 6.52 | 30 | 80 | 8 | |
8 | 8.7 | 40 | 90 | 10 | |
10 | 10.87 | 50 | 110 | 12 | |
12 | 13.05 | 60 | 120 | ||
16 | 17.4 | 80 | 170 | 16 | |
20 | 21.75 | 100 | 200 | 20 | |
25 | 26.75 | 25 |
■ Tapered edge end mill 4-flute (single angle 1°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
1° | *3 | 3.52 | 15 | 61 | 6 |
4 | 4.7 | 20 | 66 | ||
5 | 5.87 | 25 | 71 | ||
6 | 7.05 | 30 | 80 | 8 | |
8 | 9.4 | 40 | 90 | 10 | |
10 | 11.75 | 50 | 110 | 12 | |
12 | 14.09 | 60 | 120 | ||
16 | 18.79 | 80 | 170 | 16 | |
20 | 23.49 | 100 | 200 | 20 | |
25 | 28.49 | 25 |
■ Tapered edge end mill 4-flute (single angle 1゚30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
1゚30′ | *3 | 3.79 | 15 | 61 | 6 |
4 | 5.05 | 20 | 66 | ||
5 | 6.31 | 25 | 71 | ||
6 | 7.57 | 30 | 80 | 8 | |
8 | 10.09 | 40 | 90 | Ten | |
10 | 12.62 | 50 | 110 | 12 | |
12 | 15.14 | 60 | 120 | 16 | |
16 | 20.19 | 80 | 170 | 20 | |
20 | 25.24 | 100 | 200 | 25 | |
25 | 30.24 | 32 |
■ Tapered edge end mill 4-flute (single angle 2°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
2° | *3 | 4.05 | 15 | 61 | 6 |
4 | 5.4 | 20 | 66 | ||
5 | 6.75 | 25 | 71 | 8 | |
6 | 8.1 | 30 | 80 | ||
8 | 10.79 | 40 | 90 | 10 | |
10 | 13.49 | 50 | 110 | 12 | |
12 | 16.19 | 60 | 120 | 16 | |
16 | 21.59 | 80 | 170 | 20 | |
20 | 26.98 | 100 | 200 | 25 | |
25 | 31.98 | 32 |
■ Tapered edge end mill 4-flute (single angle 2°30′)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
2゚30′ | *3 | 4.31 | 15 | 61 | 6 |
4 | 5.75 | 20 | 66 | ||
5 | 7.18 | 25 | 71 | 8 | |
6 | 8.62 | 30 | 80 | 10 | |
8 | 11.49 | 40 | 90 | 12 | |
10 | 14.37 | 50 | 110 | 16 | |
12 | 17.24 | 60 | 120 | ||
16 | 22.99 | 80 | 170 | 20 | |
20 | 28.73 | 100 | 200 | 25 | |
25 | 33.73 | 32 |
■ Tapered edge end mill 4-flute (single angle 3°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
3° | *3 | 4.57 | 15 | 61 | 6 |
4 | 6.1 | 20 | 66 | ||
5 | 7.62 | 25 | 71 | 8 | |
6 | 9.14 | 30 | 80 | 10 | |
8 | 12.19 | 40 | 90 | 12 | |
10 | 15.24 | 50 | 110 | 16 | |
12 | 18.29 | 60 | 120 | 20 | |
16 | 24.39 | 80 | 170 | 25 | |
20 | 30.48 | 100 | 200 | 32 | |
25 | 35.48 |
■ Tapered edge end mill 4-flute (single angle 4°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
4° | *3 | 5.1 | 15 | 61 | 6 |
4 | 6.8 | 20 | 66 | 8 | |
5 | 8.5 | 25 | 71 | ||
6 | 10.2 | 30 | 80 | 10 | |
8 | 13.59 | 40 | 90 | 12 | |
10 | 16.99 | 50 | 110 | 16 | |
12 | 20.39 | 60 | 120 | 20 | |
16 | 27.19 | 80 | 170 | 25 | |
20 | 33.99 | 100 | 200 | 32 | |
25 | 38.99 |
■ Tapered edge end mill 4-flute (single angle 5°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
5° | *3 | 7.37 | 25 | 75 | 6 |
4 | 9.25 | 30 | 80 | 8 | |
5 | 11.12 | 35 | 85 | 10 | |
6 | 13 | 40 | 90 | 12 | |
8 | 16.75 | 50 | 110 | 16 | |
10 | 20.5 | 60 | 130 | 20 | |
12 | 22.5 | ||||
16 | 30 | 80 | 170 | 25 | |
20 | 37.5 | 100 | 200 | 32 | |
25 | 42.5 | 42 |
■ Tapered edge end mill 4-flute (single angle 6°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
6° | *3 | 8.26 | 25 | 75 | 8 |
4 | 10.31 | 30 | 80 | 10 | |
5 | 12.36 | 35 | 85 | 12 | |
6 | 14.41 | 40 | 90 | ||
8 | 18.51 | 50 | 110 | 16 | |
10 | 22.61 | 60 | 130 | 20 | |
12 | 24.61 | ||||
16 | 32.82 | 80 | 170 | 32 | |
20 | 41.02 | 100 | 200 | ||
25 | 46.02 | 42 |
■ Taper blade end mill 4-flute (single angle 7°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
7° | *3 | 9.14 | 25 | 75 | 8 |
4 | 11.37 | 30 | 80 | 10 | |
5 | 13.59 | 35 | 85 | 12 | |
6 | 15.82 | 40 | 90 | ||
8 | 20.28 | 50 | 110 | 16 | |
10 | 24.73 | 60 | 130 | 20 | |
12 | 26.73 | 25 | |||
16 | 35.65 | 80 | 170 | 32 | |
20 | 44.56 | 100 | 200 | 42 | |
25 | 49.56 |
■ Tapered edge end mill 4-flute (single angle 8°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
8° | *3 | 10.03 | 25 | 75 | 10 |
4 | 12.43 | 30 | 80 | 12 | |
5 | 14.84 | 35 | 85 | ||
6 | 17.24 | 40 | 90 | 16 | |
8 | 22.05 | 50 | 110 | 20 | |
10 | 26.86 | 60 | 130 | 25 | |
12 | 28.86 | ||||
16 | 38.49 | 80 | 170 | 32 | |
20 | 48.11 | 100 | 200 | 42 | |
25 | 53.11 |
■ Tapered edge end mill 4-flute (single angle 10°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
10° | *3 | 11.82 | 25 | 75 | 10 |
4 | 14.58 | 30 | 80 | 12 | |
5 | 17.34 | 35 | 85 | 16 | |
6 | 20.11 | 40 | 90 | ||
8 | 25.63 | 50 | 110 | 20 | |
10 | 31.16 | 60 | 130 | 25 | |
12 | 33.16 | 32 | |||
16 | 44.21 | 80 | 170 | ||
20 | 55.27 | 100 | 200 | 42 | |
25 | 60.27 |
■ Tapered edge end mill 4-flute (single angle 15°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
15° | *3 | 16.4 | 25 | 85 | 16 |
*4 | 20.08 | 30 | 90 | ||
5 | 23.76 | 35 | 110 | 20 | |
6 | 27.44 | 40 | 120 | 25 | |
8 | 34.79 | 50 | 140 | 32 | |
10 | 42.15 | 60 | 150 | ||
12 | 44.15 | ||||
16 | 58.87 | 80 | 170 | 42 | |
20 | 73.59 | 100 | 200 |
■ Tapered edge end mill 4-flute (single angle 20°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
20° | *3 | 21.2 | 25 | 85 | 16 |
*4 | 25.84 | 30 | 90 | 20 | |
*5 | 30.48 | 35 | 110 | 25 | |
6 | 35.12 | 40 | 120 | ||
8 | 44.4 | 50 | 140 | 32 | |
10 | 53.68 | 60 | 150 | 42 | |
12 | 55.68 | ||||
16 | 74.24 | 80 | 170 | ||
20 | 92.79 | 100 | 200 |
■ Tapered edge end mill 4-flute (single angle 25°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
25° | *3 | 21.65 | 20 | 100 | 16 |
*4 | 27.32 | 25 | 105 | 25 | |
*5 | 32.98 | 30 | 110 | ||
6 | 38.64 | 35 | 120 | 32 | |
8 | 40.64 | ||||
10 | 47.3 | 40 | 140 | ||
12 | 49.3 | ||||
16 | 62.63 | 50 | 150 | 42 | |
20 | 75.96 | 60 | 160 |
■ Tapered edge end mill 4-flute (single angle 30°)
One angle (θ) |
Tip diameter (φD) |
Large end diameter (φD1) |
Blade length (𝓵) |
Overall length (L) |
Shank diameter (φd) |
30° | *4 | 27.09 | 20 | 100 | 25 |
*5 | 28.09 | ||||
6 | 34.87 | 25 | 110 | 32 | |
8 | 36.87 | ||||
10 | 44.64 | 30 | 130 | ||
12 | 46.64 | ||||
16 | 73.74 | 50 | 150 | 42 | |
20 | 77.74 |
Related Products
-
Atsuchi Iron Works BAU-T Tủ Blaster Máy Dạng Bàn Xoay Tự Động (Loại Áp Suất Trực Tiếp) – Blaster Cabinet Automatic Swing Table Type Machine (Direct Pressure Type)
-
Watanabe WSP-ACW Bộ Chuyển Đổi AC 2 Đầu Ra (Giá Trị Trung Bình) – 2-Output AC Converter (Average Value)
-
Chiyoda Seiki Van Điều Áp Cho Áp Suất Cao Phía Thứ Cấp Loại GLU-180 (Dùng Cho Oxy) (Pressure Regulators For Secondary Side High Pressure Type GLU-180 Type(For Oxygen))
-
Takeda Machinery AXY-1013W Bàn XY – XY table
-
Hammer Caster 435 S – WRB Bánh Xe Cao Su – Rubber Wheel
-
Kitz “Filltite®” Vòng Đệm Van Bi Đặc Biệt Cho Nhiệt Độ Cao – “Filltite®” Special Seat Ball Valves For High Temperature