Japan, Toho Seisakusho
Toho Seisakusho MCHT Series Control Motor With Manual Handle And Torque Limit Switch
Product Made in Japan
Manufacturer: Toho Seisakusho
Model: MCHT Series
MCHT-10 type control motor output torque 100N・m
MCHT-20 type control motor output torque 200N・m
MCHT-40 type control motor output torque 400N・m
MCHT-100 type control motor output torque 1000N・m
- Equipped with a manual handle:
Manual operation is possible without a clutch, and the special structure prevents the handle from rotating during electric operation, making it easy to handle. - With torque limit switch:
Automatically stops the control motor during overtorque to protect equipment and equipment from failure.
Two-position control or floating control (B) and proportional action (C, CX, CE, E) are standardized. - Proportional action type ・Built-in balancing relay (CX):
135Ω signal (electrical type) can be directly input
– Proportional action type – Built-in electronic positioner (CE) allows direct input of DC4 to 20mA, DC1 to 5V or DC0 to 10V signals (electronic/DDC)
・Option: With push-cut function
・Option: Forced opening/closing type proportional control control motor
- Equipped with a manual handle:
*All models use extreme pressure lubricating grease, so there is no need for regular lubrication.
* Explosion-proof type is also available.
*We can accommodate custom specifications other than those listed above, so please contact us.
Specification
| Format | MCHT-10 type control motor MCHT-20 type control motor MCHT-40 type control motor MCHT-100 type control motor | |||
|---|---|---|---|---|
Output torque | MCHT-10 | 100 N・m | ||
| MCHT-20 | 200 N・m | |||
| MCHT-40 | 400 N・m | |||
| MCHT-100 | 1000 N・m | |||
Torque limit switch setting value | MCHT-10 | 100 N・m ±10% | ||
| MCHT-20 | 200 N・m ±10% | |||
| MCHT-40 | 400 N・m ±10% | |||
| MCHT-100 | 1000 N・m ±10% | |||
Rated voltage | MCHT-10 | 1φ, AC100V/110V, AC200/220V±10% (50/60HZ) | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | Motor: 3φ, AC200/220V, AC400/440V±10% (50/60HZ) Operation circuit: 1φ, AC100V/110V, AC200/220V±10% (50/60HZ) | |||
| Control operation | B: 2-position/3-position operation C, CX, CE, E: Proportional operation | |||
| Output shaft rotation angle | 90° | |||
Operating time (90°) | MCHT-10 | 30/25s or 60/50s (50/60Hz) | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | 36/30s (50/60Hz) | |||
Control operation | MCHT-10 | B: 2-position/3-position operation C, CX, CE, E: Proportional operation | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | B: 2-position/3-position operation C, E: Proportional operation | |||
Power consumption | Format | B, C, E | CX/CE | |
| MCHT-10 | max.70VA | max.73/80VA | ||
| MCHT-20 | max. 100VA | max. 103/110VA | ||
| MCHT-40 | max.230VA | max.233/240VA | ||
| MCHT-100 | 0.15kW | – | ||
Motor type | MCHT-10 | Single-phase capacitor motor with brake, Class E insulation, 30 minutes rating | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | 3-phase induction motor with brake, 4 poles, class E insulation, 30 minutes rating | |||
Signal contact | MCHT-10 | B type only, SPST x 2 (ON when fully open, ON when fully closed) Contact capacity AC125/250V 10A (non-inductive load) | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | B: max. 6 pieces, C,E: max. 4 pieces, NC or NO contact capacity AC250V 10A (non-inductive load) | |||
| Input signal | CX: 135Ω potentiometer 3-wire connection CE: DC4~20mA, DC1~5V or DC0~10V | |||
| Protective structure | IP55 | |||
Material | MCHT-10 | Case: aluminum alloy | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | Case: cast iron | |||
Permissible ambient temperature | MCHT-10 | B, C, E type: -20 to +60℃ CX, CE type: -10 to +50℃ | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | CX, CE type: -5 to +40℃ | |||
| Paint color | Munsell N5 | |||
Mass/Drawing | MCHT-10 | Please refer to the catalog PDF for details | ||
| MCHT-20 | ||||
| MCHT-40 | ||||
| MCHT-100 | Please refer to the catalog PDF for details | |||
