Okabe A30-0030 Slide Bracket |

Okabe A30-0030 Slide Bracket

Product Made in Japan
Manufacturer: Okabe
Model: A30-003

Extendable bracket for scaffolding walk board

Caution: Do NOT install more than 1 Slide Bracket between Wall-Ties.

Product	Adjustment range (L)	Weight (kg/pc)	Quantity (pc/bundle)	Weight (kg/bundle)	Packing
Slide Bracket E500	350~545	3.55	5	18	Secured with rope
E750	530~775	4.65	5	23	Secured with rope
E1000	770~1025	5.94	5	30	Secured with rope
D500	350~545	3.69	5	18	Secured with rope
D750	530~775	4.87	5	24	Secured with rope
D1000	770~1025	6.30	5	32	Secured with rope
Bracket clamp		0.39	50	20	Case

Type E: Electroplated　　Type D: Hot dip galvanized items are made to order items.

Product	L1	L2	L3
Slide Bracket E500, D500	350~545	300	300
E750, D750	530~775	480	415
E1000, D1000	770~1025	730	415

Features
You can adjust the length.
You can use the grip hardware (clamp) for both frame scaffolding and pipe scaffolding, as it is compatible with both φ 42.7 and φ 48.6 pipes.
To install a handrail pole, you can use a detachable bracket clamp.

Allowable load
● When you use the bracket for auxiliary scaffolding for frame scaffolding (or pipe scaffolding), the bracket can bear up to 2.45kN (250kgf) per board.
● When you use the bracket for single-row scaffolding, you should not exceed L of 600mm, and the scaffolding height should not exceed 15m. The bracket can bear up to 1.47kN (150kgf) per span per layer.

Cautions
● Do NOT install more than one Slide Bracket between wall-ties. (See above figure).
● Tighten the bracket clamp with a tightening torque of 3.43~4.41kN・cm (350~450kgf・cm). (Do not overtighten the clamp or the bolt will be damaged. Also, be careful not to forget to tighten the clamp.)
● For frame scaffolding, the best location to install brackets is where frame braces are.
● For both frame scaffolding and pipe scaffolding, the best location to install the bracket is the closest part to the Wall-Tie.
● Be sure to use the product within the allowable load