Okabe
Okabe B40-0330 ADEKA Stopper
Product Made in Japan
Manufacturer: Okabe
Model: B40-0330
Post-installing polyethylene resin waterstop plate
Excellent for preventing water penetration of floor and wall concrete oints, etc.
Features
- Water-pressure resistant capability is over 0.3MPa.
- Adheres firmly to concrete.
- Lightweight and easy to handle .
- Easy installation.
- Can nail the stopper.
Product | a | b | c | d | Length (m)/box |
Weight (kg)/box |
---|---|---|---|---|---|---|
VE-100 | 15 | – | – | 3 | 20 | 7 |
VE-150 | 15 | 40 | – | 3 | 20 | 11 |
VE-200 | 15 | 40 | 65 | 3 | 20 | 14 |
Size
Installation Manual (for unhardened concrete)
Push the product in the fresh concrete BEFORE it is hardened.
Cautions
Do not use the product in the part of expansion joints of concrete.
Jointing method
The set of the product consists of four pieces of connecting clips and one waterswelling sealant P201.
Use two clips to connect the product.
Tighten the clips with pliers, hammer, etc.
Apply P-201 on the front and the back surfaces of the connected part with the width of approximately 20mm. Be sure to cover the connecting clips with the sealant. Even if P-201 is not hardened, the product can be installed.