Product Made in Japan
Manufacturer: SENYO Co., LTD

A clamp tube that seals the end of the rope without reducing the strength of the crimped part.
The clamp tube is thinner and longer than the W clamp tube. And its shape after crimping is smaller in diameter and smarter than the W type. The cross section of the clamp tube is almost similar to the W tube.

The W type requires that the end of the rope protrude slightly even after crimping. But the WN type requires that the end of the rope protrude slightly even after crimping. But the WN type requires that the end of the rope not reduce the strength of the crimped part. So that the sling operator will not be injured by the protruding part of the rope. This is a new type that can be adapted to the PL law era with a clamp tube designed to seal the area.

• Thin long size

WN Clamp Pipe Lock Processing Method

• Fold back the end of the rope to make an eye and set the clamp tube under the neck of the eye.
• Align the rope end with the end of the clamp tube.
• Crimp with the specified pressure, being careful not to pull the end of the rope into the clamp tube.
• Remove any protruding burrs with a burr cut, etc.