Manufacturer: Hishiko Co., Ltd.
Model: KLRM-S Series
Applications
- KLRM-S is installed as a gripper in industrial robot and used for transporting small workpiece.
Features
- Small and light workpiece is sometimes difficult to release because of remanence.KLRM-S can release workpiece immediately by the function of the pushing pin installed in the center of the lifting surface.
- KLRM-S requires rectifier as a power unit.
※The rectifier is sold separately. Recommended rectifier is KS24 series.
Specification
Stock No. |
Model |
Dimensions(mm) |
Tapped Hole |
Stopper Hole |
Pushing Force (kg) |
Voltage DC(V) |
Current(A) |
Max. Holding Power |
Weight(kg) |
φD |
H |
A |
S961123 |
KLRM30S |
30 |
25 |
10 |
M6-depth7 |
4depth3 |
0~1.0 |
24 |
0.09 |
30N (3kgf) |
0.13 |
S961124 |
KLRM40S |
40 |
15 |
0.16 |
110N (11kgf) |
0.20 |
Controller For Electromagnetic Holder HCC024.5AE
Application
- You use HCC024.5AE as a control unit for the electromagnetic holder KLRM series.
Feature
- We have added a neutralization function.
- Neutralization function helps releasing workpiece with strong residual magnetism.
- Output voltage is adjustable. You can control it using the dial on the front panel.
Stock No. |
Model |
Dimensions (mm) |
Input |
Output |
Current |
Neutralization Duration |
Weight (kg) |
Width |
Height |
Depth |
S981248 |
HCC024.5AE |
130 |
225 |
180 |
AC100/AC200V 50/60Hz Single Phase |
DC1 ~ 24V |
5A Max. |
About 0.5 Sec. (Adjustable) |
3.5 |
Rectifier For Electromagnetic Holder KS24/80
Applications
- Used for the power source of KLRM electromagnetic holder.
Features
- KS24 and KS80 series convert inputted alternate current into direct current and then output it.
Stock No. |
Model |
Applicable Product |
Dimensions (mm) |
Input |
Output DC(V) |
Current (A) |
Weight (kg) |
Width |
Height |
Depth |
S980122 |
KS24×3B |
KLRM・KLRM-B・KLRM-S |
200 |
100 |
155 |
Single Phase AC100V |
24 |
3 |
3.5 |
S980102 |
KS80×3 |
KLRM・KLRM-B |
150 |
60 |
100 |
90 |
1 |