KAJI TECHNOLOGY CORPORATION
KAJI TECHNOLOGY YD4-75 Water-Cooled Lubricated Compressor
Manufacturer: KAJI TECHNOLOGY CORPORATION
Made in Japan
Model: YD4-75
Specifications of YD4-75
| Disch. press (MPaG) | 24.50 |
|
Power required (kW)
|
90 |
| Model | YD4-75 |
| 1st cyl. bore (mm) × No. | 300×1 |
| 2nd cyl. bore (mm) × No. | 130×1 |
| 3rd cyl. bore (mm) × No. | 70×1 |
| 4th cyl. bore(mm)×No | 35×1 |
| 5th cyl. bore(mm)×No. | – |
| Stroke (mm) | 180 |
| Rotational speed (min⁻¹) | 480 |
| Piston displ. (m³/min) | 6.0 |
| Cooling water (ℓ/min) | 110 |
| Poles of motor | 6P |
| Press. reg. method |
By suction opening unloaders with pressure switch and solenoid valve
|
| Weight of compr. (kg) | 3500 |
| Standard accessories | Suction filter, oil gauge, water flow indicator, drainage valve for cooling water, companion flange, suction opening unloaders, inter cooler & separator (with safety valve, pressure gauge and drain valve), forced lubrication device (with gear pump, oil pressure gauge and oil pressure switch) for above 75kW, cylinder lubricator for above 75kW, disassembling tools, spare parts (valve plates, valve springs, o-rings for chest cover – each 1/2 sets), anchor bolts and nuts. |
| Optional accessories |
Induction motor, motor pulley & V-belts, pressure switch, solenoid valve, common base, cooling water relay, after cooler & separator with safety valve, pressure gauge and drain valve, starter panel, control panel, wiring, piping, receiver and others.
|
Related Products
-
KAJI TECHNOLOGY WD2A-19 Water-Cooled Lubricated Compressor
-
KAJI TECHNOLOGY VD3-75-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY VS2-45-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY YD3-140-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY VS-75GH-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY WT3-480-OL Medium and High Pressure Oil-Free Compressor
REQUEST QUOTATION
PAYMENT
LINK
