KAJI TECHNOLOGY CORPORATION
KAJI TECHNOLOGY VS2-45H Water-Cooled Lubricated Compressor
Manufacturer: KAJI TECHNOLOGY CORPORATION
Made in Japan
Model: VS2-45H
- For booster use, specifications vary depending on gas handled, suction temperature, suction pressure, discharge pressure.
gas quantity and other requirement. Please refer to us with specific requirements. - Under-mentioned table is an example of our specification.
Standard accessories
Suction snubber, inter cooler & separator (with safety valve, pressure gauge, and drain valve), V-belts, motor pulley, common base, disassembling tools, spare parts (valve plates, valve springs, o-rings for chest cover – each 1/2 sets), anchor bolts and nuts.
Optional accessories
Induction motor, pressure switch for suction pressure and discharge pressure, after cooler & separator (with safety valve, pressure gauge and drain valve), starter, panel, control panel, receiver, various controling and recording equipment and others.
Specifications of VS2-45H
| Disch. press (MPaG) | 7.35 |
Suct press (MPaG) | 0.59 – 0.69 |
| Power required (kW) | 37 |
| Model | VS2-45H |
| 1st cyl. bore(mm)×No | 130×1 |
| 2nd cyl. bore (mm) × No. | 65×1 |
| 3rd cyl. bore (mm) × No. | – |
| Stroke (mm) | 160 |
| Rotational speed (min⁻¹) | 490 |
| Piston displ. (m³/min) | 0.94 |
| Poles of motor | 6P |
Related Products
-
KAJI TECHNOLOGY YD2-45-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY KL50V-5.5OLS-PIII SF6 Gas Handling System
-
KAJI TECHNOLOGY WH3A-22B Water-Cooled Lubricated Compressor
-
KAJI TECHNOLOGY AV Series RECEIVERS Oil-Free Compressor
-
KAJI TECHNOLOGY YD2-180-OL Medium and High Pressure Oil-Free Compressor
-
KAJI TECHNOLOGY KL50V-19OL-SPII SF6 Gas Handling System
