Manufacturer: Sanshu Sangyo Co., Ltd.
Model: SP Series

Fully Automated Operation by Microcomputer

1. Fully Automatic Drying with Basic Drying Program
   • Humidity Priority – 4 items (monitors the moisture of the dry goods and ensures error-free drying)
   • Time Priority – 4 items (performs drying according to the set program, based on the specified time)
2. Custom Program Creation Available
   • Programs can be created based on the operator’s preferences and can store up to three courses.

Small dryer

Panel: Made of steel plate

SP-10K	SP-12K	DigiMac control box

Fully automatic dryer

Panel: Rigid urethane foam insulation panel, 25mm thickness

SP-15AT	SP-30AT	SP-45AT
SP-60AT	SP Microcomputer Control Box

Standard Type A Dryer

Panel: Rigid urethane foam insulation panel, 25mm thickness

SP-15A	SP-30A	SP-45A
SP-60A	Standard control box

Wood and oil dual-purpose type

SP-60AM	Standard control box

Standard specifications

		Small dryer		Large dryer				New: Dual-purpose dryer for oil (Note 1)
Model		SP-10K	SP-12K	SP-15A-AT	SP-30A-AT	SP-45A-AT	SP-60A-AT	SP-30AM	SP-45AM	SP-60AM
Capacity (kg)		3〇〜50	60〜80	75 〜1 00	150〜200	200〜300	300〜400	150〜200	200〜300	300〜400
Shrimp type	Number of pieces	10	12（注）	15	30	45	60	30	45	60
	Dimensions (mm)	635X635	600X1,200
Blower motor output (W)		25	100	250		400	750	250	400	750
Burner	Model	GB-211 T			NK-1 0A			NK-1 0M
	Fuel used	JIS1 No. Kerosene			JIS1 No. Kerosene (Note 5)			New Kerosene (JIS1 No.)
	Fuel consumption (L/H)	1.9	2.9	3.8	5.7	7.6		5.7	7.6
Control device	Control method	Two-position ON-OFF control (Note 2) SP-AT uses microcontroller-based automatic program control (Note 3)
	Temperature controller	Thermistor type (with drying timer) ※The SP-AT model uses a Pt sensor
	Safety device	①Combustion Safety Control Device (Protective Relay) ②Abnormal Overheating Prevention Device (Manual Reset Type) ③Burner Failure Alarm Buzzer
Drying Room Material		Steel Plate Panel		Hard Urethane Foam Insulation Panel 25mm thick
Chimney Diameter (mm)		¢>90		6,130		6,150
Dryer Dimensions	Overall Width (mm)	920	606	1,245	1,900	2,550	3,250	2,020	2,660	3,370
	Depth (mm)	680	1,390	1,280
	Overall Height (mm)	1,800	1,830	1,950 (Note 4)		2,100 (Note 4)		2,100
Total Input Power (kw)	Single- phase 100V	0.26		0.65		0.94	1.51	0.65	0.94	—
	Single- phase 200V	—								1.51
	Three- phase 200V	—					1.41			1.41

(Notes)

1. The firewood and oil mixed-use type is made to order.
2. The SP-A model can be equipped with a 6-stage program controller as an option.
3. The SP-AT model controls temperature, time, airflow, and circulation volume using SP microcontroller-based programming.
4. The SP-15-60 AT requires a 400mm height space at the top of the drying room for the exhaust hood installation.
5. The heavy oil specification is an option.
6. The spacing of the Ebira shelves can be changed according to your preference with an option.

Note: This specification is subject to change without prior notice as part of ongoing improvements.

Custom Specifications

Gas-Fired Method / Internal Stainless Steel (LPG)	SUS Trolley Method
Biomass Fuel Hot Water Utilization Method	Spot Air Distribution Method

Option

Standard Ebira 600×1200	Slice-type fine mesh Ebira
6-stage program controller	Seiro 7-2 type

Exhaust gas booster (patent pending)

Depending on the installation location of the dryer, such as in areas with poor exhaust conditions, like longer horizontal runs of the chimney, the burner combustion is therefore stabilized, which in turn minimizes soot generation.
The installation can be done freely both vertically and horizontally, and it does not require a specific location.