Suntes PC Y type (Positive clamper) Hydraulic disc brake

Manufacture: Suntes (Sanyo Shoji Co., Ltd.)
Model: PC Y type (Positive clamper)

Model code

PC Y type

Size

Model	A	B	C	D	E	F	G	H	J	K	L	M	nP	T
PC-140Y-01	18	51	36	13	18	11	42	50	17	8	58	twenty five	2-M6 x 16	3
PC-200Y-01	twenty one	63	45	18	twenty one	15	54	55	18.5	10	70	27.5	2-M8 x 15.5	6
PC-300Y-01	28	79	54	18	28	twenty four	70	68	twenty four	12	86	34	2-M10 x 19	6
PC-450Y-01	30	104	74	twenty three	30	32	85	79	29.5	18	101	39.5	2-M14 x 21.5	10
PC-650Y-01	46	144	103	35	46	45	126	100	38.5	29	142	50	2-M16 x 26	10

Specification

Model	PC-140Y-01	PC-200Y-01	PC-300Y-01
Cylinder diameter(mm)	φ14	φ20	φ30
Cylinder Area( ^cm2 )	1.54	3.14	7.07
Disk outer diameter(mm)	φ50～∞	φ100～∞
Effective Braking Radius(m)	-8	-10	-12
Pad Type	DB-0480-K01	DB-0481-K01	DB-0482-K01
Pad Effective Wear Allowance(mm)	2
Pad Friction Coefficient(μ)	Static: 0.4 ^*
Hydraulic pressure used(MPa)	0.15–5	0.1 to 5
Hydraulic oil	Mineral oil (equivalent to ISO VG32)
Required oil volume( ^cm3 )	0.2	0.4	0.9
mass(kg)	0.2	0.35	0.69

Model	PC-450Y-01	PC-650Y-01
Cylinder diameter(mm)	φ45	φ65
Cylinder Area( ^cm2 )	15.90	33.17
Disk outer diameter(mm)	φ150～∞	φ260～∞
Effective Braking Radius(m)	-18	-29
Pad Type	DB-0483-K01	DB-0484-K01
Pad Effective Wear Allowance(mm)	2
Pad Friction Coefficient(μ)	Static: 0.4 ^*
Hydraulic pressure used(MPa)	0.05 to 5
Hydraulic oil	Mineral oil (equivalent to ISO VG32)
Required oil volume( ^cm3 )	2.9	6.0
mass(kg)	1.3	3.3

When using new pads, please break them in to obtain the required brake torque.
The friction coefficient in the specifications column is the value after breaking in.

Pressing force

Torque calculation T = 2 x μ x F x r
T: Torque (Nm)
μ: Pad friction coefficient
F: Pressing force (N)
r: Effective braking radius (m)
Torque calculation for non-backlash specificationsT = μ × F × r

If you have any questions about specifications, please contact us.
The dimensions and specifications listed may be changed without notice for improvement purposes.