Made in Japan
Manufacturer: Fukuda Seiko
Model: DC040B–6

Features

The DC040B Series Brush Commutated DC Motor is a 40 mm diameter unit offered in 6 lengths
with continuous output torques of 0.017 to 0.081 Nm.

Benefits

– Speeds up to 8,500 RPM possible

– DC bus voltage up to 48 VDC

– Eight standard windings. Special windings, sintered bronze bearings, ball bearings; copper graphite brushes, RFI suppression available– 2 pole stator with ceramic magnets

– 7 slot skewed armature cogging reduction Dimensional Drawings: DC040B-1 • DC040B-2 • DC040B-3 • DC040B-4 • DC040B-5 • DC040B-6

Optional Assemblies

– Encoder: E21C/D, E30C/D

– Gearboxes: G30A, G40A, PLG42S, G51A

– Brakes: B30A, B49A

– Drives: BGE6060A, PBL4850E*

Motor Characteristics

1Recorded at maximum winding temperature at 25°C ambient and without heatsink. **For PBL4850E to operate a brush motor, an encoder is required.

Dimensional Drawings: DC040B-1 • DC040B-2 • DC040B-3 • DC040B-4 • DC040B-5 • DC040B-6

Performance Data & Graph: DC040B–6

The V1 and V2 ratings are intended to demonstrate the motor winding performance at different applied voltages. Use the voltage constant to specify the motor winding selection along with the motor p/n: for example, DC030C-1 (3.31 V/krpm).
1Recorded at maximum winding temperature at 25°C ambient and without heatsink.