Sunny Giken MicroPecker RAM Monitor S810-MP-R1 For Highspeed Single Wire

Manufacturer: Sunny Giken Inc.
Model : S810-MP-R1

Features

A real-time RAM monitor supports a single-wire debug interface.
MicroPecker RAM Monitor uses the debug interface built into microcontrollers. This is designed for embedded software development.
It allows real-time monitoring and data collection from RAM. It does not interrupt the execution of the user’s program.
An optional interface conversion unit can be installed. This makes it compatible with various microcontroller debug interfaces.

RAM monitor with 1-wire interface

Interface conversion unit for various microcontrollers

Time synchronization function with MicroPecker CAN/LIN analyzer

Compatible microcomputers

■ Standard product《S810-MP-R1》

Compatible microcomputers	Debugging I/F	Product name	Product Model
Renesas Electronics R32C/100 series	NSD	MicroPecker ECU Compatible RAM Monitor for Highspeed Single Wire	S810-MP-R1

■ 《S810-MP-R1》Optional products
・By adding the option to the MicroPecker ECU Compatible RAM Monitor for Highspeed Single Wire (S810-MP-R1), the following microcontrollers will be supported.

Compatible microcomputers	Debugging I/F	Optional Units	Product Model
Renesas Electronics SH7047, SH7050, SH7147, SH72Ax, SH7450	AUD	NSD to AUD conversion unit	S810-MP-EX1
Renesas Electronics V850E/PG2	NBD	NSD to NBD conversion unit	S810-MP-EX4
Renesas Electronics V850E2/Fx4, V850E2/PJ4, RH850/C1x, RH850/P1M, RH850/F1K, RH850/F1KM, RH850/F1L	N-Wire	NSD N-Wire conversion unit	S810-MP-EX5
Renesas Electronics RL78/F13, RL78/F14, RL78/F15, RL78/F23, RL78/F24	OCD	NSD OCD (RL78) conversion unit	S810-MP-EX6
	OCD, OCD+CSI	NSD◆RL78(OCD+CSI) conversion unit	S810-MP-EX6-CSI
MPC564xA, MPC5777M manufactured by NXP Semiconductors	Nexus	Nexus Conversion Unit	S810-MP-EX7
NXP Semiconductors S12ZVx	BDM	BDM conversion unit	S810-MP-EX8
AURIX TC3xx Series manufactured by Infineon Technology TC332, TC333, TC334, TC336, TC337, TC356, TC357, TC364, TC365, TC366, TC367, TC375, TC377, TC387, TC389, TC397, TC3E7	JTAG for AURIX	JTAG for AURIX conversion unit	S810-MP-EX9

*The MicroPecker ECU compatible RAM monitor for Highspeed Single Wire “S810-MP-R1” must be purchased separately.

Specifications

■ Main unit specifications

Host Interface		USB 2.0 High Speed (480Mbps)
Host operating environment	PC[*1]	IBM PC/AT compatible machine
	OS [*2]	Windows 11(64bit), 10(64bit), 8.1(64bit)
	CPU	Celeron 1.6GHz or higher recommended[*3]
	hard disk	50MB or more of free space [*4]
	Memory	1Gbyte or more recommended[*3]
	USB port	Compatible with USB2.0 (High Speed), 1 port required[*5]
	display	Display magnification: “Small – 100%” or “Medium – 125%” [6] Resolution: 1024 x 768 or higher recommended [7]
	others	Monitor, keyboard, and mouse
power supply		USB Bus Power (5V, 400mA)
Dimensions[*8]		62(W)×30(D)×12(H)mm
weight		35g

[*1]: If your PC has a power saving function, set it so that the PC will not go into sleep mode, the HDD will not stop, and the CPU clock will not slow down while using this product.
[*2]: Operation in a virtual environment is not supported.
[*3]: If you use the graph display function, the logging function with binary output, or the time stamp synchronization function with the RAM monitor and CAN analyzer at the same time, we recommend using a PC with higher specifications.
[*4]: If you save the logging file to a local hard disk, ensure that there is sufficient free hard disk space.
[*5]: If you use an external USB hub, be sure to select a self-powered device and connect it after supplying power from an external source. If you connect a USB hub that is bus-powered, it may not work or may become unstable.
[*6]: We do not guarantee operation at display magnifications other than “Small – 100%” or “Medium – 125%”.
[*7]: This is the recommended value when the display magnification is set to “Small – 100%”.
[*8]: The dimensions do not include the protrusions of the connection terminals.

■ NSD cable specifications for MicroPecker

type	Coaxial Cable
Impedance	100 ohms
Cable length	1m
shield	can be
Target side connector	HRM-200-4-C(40) (Hirose Electric) Target board compatible connector: HRM-300-126B (Hirose Electric)