SANKO ELECTRONIC LABORATORY FE Exclusive Probes For SWT Series Electro-magnetic / Eddy Current Coating Thickness Metters

Product Made in Japan
Manufacturer: SANKO ELECTRONIC LABORATORY
Model: FE Series

Features

Separate-interchangeable probes available with a main unit.
Selections of probe for ferrous (electro-magnetic) or non-ferrous ( eddy current) substrate depending on a measuring object.
Capability of selections probe like high-stable probe to measure minute piece objects or alike depending on applications and a measurement range.

Models	Fe－2.5※1/2.5L	Fe-2.5LwA	Fe-0.6Pen
Methods	Magnetic inducing type
Ranges	0～2.50mm		0～600μm
Display resolutions	1μm：0～999μm switching to 0.1μm：0～400μm 0.5μm：400～500μm 0.01mm：1.00～2.50mm		1μm：0～600μm switching to 0.1μm：0～400μm 0.5μm：401～500μm
Accuracies (perpendicularly testing on flat face)	0～100μm：±1μm or ±2% the reading value 101μm～2.50mm：±2% 0～100μｍ：±１μｍ　or ±2％ the reading value 101μm～600μm: ±2% the reading value
Probes	One point contact constant pressure type, V cut 2.5：φ15×47mm 2.5L：18x23x67mm	One point contact constant pressure type, Measuring part：About 20x57mm Total Length： about 550～1,540mm (flexible)	One point contact constant pressure type, V cut φ5.6×92.2mm
Probes	V type probe adaptors※2 /Non	Non
Accessories	Standard thickness, Zero plate for testing (Fe)	Standard thickness, Zero plate for testing (Fe) Carrying case	Standard thickness, Zero plate for testing (Fe)
Measuring objects	Coating, lining, thermal spray films, plating (except electrolyte nickel plating) etc. on magnetic metal substrate like iron, steel.	Coating, lining, plating on high/hard-to-reach/remote place on magnetic metal substrate like iron, steel.	Coating, lining, plating on a narrow/small place and part substrate like iron, steel.

1．Probes are heat-resistant （about 200℃）. （Ｆｅ-2..5）
2．V type probe adaptors　(３ kinds: lessΦ5, Φ5～10, Φ10～20） can be used with Fe-2.5.

Models	Fe-10	Fe-20
Methods	Magnetic inducing type
Ranges	0～10mm	0～20mm
Display resolutions	1μm：0～999μm 0.01mm：1～10mm	1μm：0～999μm 0.01mm：1～5mm 0.1mm：5～20mm
Accuracies (perpendicularly testing on flat face)	0～3mm：±(5μm + 3％ the read value) Over or 3.01mm：±3％ the read value
Probes	One point contact constant pressure type, V cut φ18x47mm	One point contact constant pressure type, V cut φ35x55mm
Accessories	Standard thickness, Zero plate for testing （Fe）
Measuring 　objects	Relatively thicker objects	Thick objects

Probe must be ordered separately.