Hakaru XS3-110 New Electronic Multimeter

Manufacturer: HAKARU PLUS CORPORATION
Model: XS3-110

Product Description

The “XS2-110 Electronic Multimeter,” which was launched in 2012, will be revamped as the “XS3-110.”
While retaining the functionality of the XS2-110, we have added new features to make the XS3-110 easier to use.
(The screens shown are from a product under development.)

Features

In order to display more information, part of the screen has been changed to a full dot area. Characters and symbols can be displayed, so the settings are displayed when manually setting.
By scanning the 2D code, device information such as model name and serial number, as well as a link to the download page for this page’s materials, will be displayed. *Patented
The PC setting connector has been changed to USB TYPE-C, so that it can be set up via USB power supply. *Utility model no. 3250122
The shape of the switch has been changed to make it easier to operate.
To make it easier to see the terminal names and device numbers, the molding color of the case body has been changed from black to ivory.
Some of the special products we produced in the past have been standardized.
The backlight is now available in two colors: amber and white (green and orange have been discontinued).

Specification

Specification

item	specification
phase wire system	(Model specification) Single-phase 2-wire, single-phase 3-wire, 3-phase 3-wire (setting switch)
Voltage Input	・AC110V, AC220V (setting switch)
Current Input	・5A
Auxiliary power supply	・AC85~264V or DC85~143V

Digital display

Measurement item (number of digits)	Input Rating	inherent error	remarks
Current (3・4)	0~1A・0~5A	±0.5%	Display unit A/kA switching
Line voltage (3, 4)	0~150V・0~300V	±0.5%	Display unit V/kV switching
Electricity (4)	0~1kW・-1~0~1kW・0~2kW・-2~0~2kW	±0.5%	Display unit switchable between W, kW and MW, negative display
Reactive Power (4)	0~Lag1kvar・Lead1~0~Lag1kvar・0~Lag2kvar・Lead2~0~Lag2kvar	±0.5%	Display units: var, kvar, Mvar switchable, with Lag and Lead display
Power factor (4)	Lead50~100~Lag50・Lead0~100~Lag0(%)	±2.0%	Lag/Lead display, 1 decimal place
Electricity (6)	Digital display: multiplication factor x 1, x 10, x 100, x 1000	±2.0% ±2.5%	5 to 120% of rated current (power factor = 1)10 to 120% of rated current (power factor = 0.5)
Reactive energy (6)	Digital display: multiplication factor x 1, x 10, x 100, x 1000	±2.5% ±2.5% ±3.0%	10 to 120% of rated current (power factor = 0)20 to 120% of rated current (power factor = 0.866) 10% of rated current (power factor = 0.866)
Frequency (3)	45~65Hz・45~55Hz・55~65Hz・	±0.5%	1 decimal place
Demand current Maximum demand current (3/4)	0~5A	±0.5%	Demand time selection setting, heat conduction root calculation method
Demand power Maximum demand power (4)	0~1kW・0~2kW	±0.5%	Demand time selection setting, heat conduction root calculation method

Communication specifications

method	item	Rating
RS-485 communication	Interface	RS-485
〃	Transmission distance	Less than 1km (maximum 32 cars)
〃	communication speed	1200・2400・4800・9600・19200bps
〃	Transmission cable	Shielded twisted pair wire (CPEV-S0.9φ)
〃	Termination resistor	Built-in 100Ω (terminal short-circuited to turn on termination resistor)
〃	Synchronization method	Start-stop synchronization method
〃	Communication Control Method	Polling selection method (half-duplex)
〃	Code used	ASCII
〃	Data format: Starbit	1 bit
〃	Data method: Data	7-bit
〃	Data format: Parity bit	even number
〃	Data format: Stop bit	1 bit
RS-485 communication (Modbus)	Interface	RS-485 communication (Modbus)
〃	Transmission distance	Less than 1km (maximum 32 cars)
〃	communication speed	1200・2400・4800・9600・19200bps
〃	Transmission cable	Shielded twisted pair wire (recommended: CPEV-S0.9φ)
〃	Termination resistor	Built-in 100Ω (terminal short-circuited to turn on termination resistor)
〃	Synchronization method	Start-stop synchronization method
〃	Communication Control Method	Polling selection method (half-duplex)
〃	Code used	RTU
〃	Data format: Starbit	1 bit
〃	Data method: Data	8-bit
〃	Data format: Parity bit	None or even number or odd number
〃	Data format: Stop bit	1 or 2 bits