Venn Co.
Venn RD-36F type pressure reducing valve (for water / hot water / air)
Manufacturer: Venn Co., Ltd.
Model: RD-36F
Features
- It can also use for red water removal and stainless steel piping with an SCS body.
- In addition, it features a low-noise design.
- Moreover, it is about 50% smaller and lighter than conventional FC products.
- Furthermore, even if the diaphragm damages, water will not leak outside.
- As a result, safety improves.
- You can also attach a pressure gauge directly to the body.
- This applies to the secondary side only.
Specifications
| Product code | RD36F-D |
|---|---|
| Valve type | Pressure reducing valve |
| type | For 1.6MPa or less |
| Nominal diameter | 25-100 (1-4) |
| Applicable fluid | Water / hot water |
| Fluid temperature | 5 to 90 ° C |
| Primary side applied pressure | 1.6MPa or less |
| Secondary adjustment pressure range (set pressure) | L: 0.05-0.35MPa, H: 0.3-0.7MPa |
| Maximum decompression ratio | 10: 1 |
| Minimum differential pressure before and after the valve | 0.05MPa |
| Allowable leakage amount | None (visual pressure gauge) |
| End connection | JIS 16K FF Flange |
| Mounting posture | Horizontal / vertical freedom |
| Material body | SCS |
| Material diaphragm | Chlorine water resistant EPDM |
| Material disc | Chlorine water resistant EPDM |
| Material parts | SUS |
| Material Spring case | Nominal diameter 15 to 50: ADC, Nominal diameter 65 to 100: FC |
Related Products
-
Venn RD-50SN Water Supply Reducing Valve
-
Venn RD-17A type pressure reducing valve for water / liquid
-
Venn RD-57N Pressure Reducing Valve for Door-to-door Water Supply (for water and hot water)
-
Venn RD-37F type pressure reducing valve (for water / hot water / air / liquid)
-
Venn RD-37 Pressure Reducing Valve (for Water, Hot Water, Air, and Liquid)
-
Venn RD-4B type pressure reducing valve (for air / gas)
