Sakae Tsushin Kogyo
Sakae HSM10 Hall effect IC
Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: HSM10
General Specifications
| Item | Specification |
|---|---|
| Current Consumption | Single output: Max. 13mA Dual output: Max. 26mA |
| Independent Linearity Tolerance | ±0.5%FS (FS = 360°) |
| Mechanical Rotating Angle | 360° (Endless) |
| Electrical Angle | 360° |
| Applied Voltage | 5V ±10% D.C. |
| Load Resistance | 10kΩ min |
| Effective Output | 10%Vin ±3%Vin ~ 90%Vin ±3%Vin |
| Output Temperature Characteristics | Within ±0.3% Vout/FS |
| Operating Temperature Range | −40°C ~ +105°C |
| Storage Temperature Range | −40°C ~ +105°C |
| Mass | Approx. 14g (not including attached nut and inner teeth washer) |
| Rotating Torque | Within 2mN·m (within 20gf·cm) |
| Protection Grade (IP) | IP65 |
Environmental Specifications
| Item | Specification |
|---|---|
| Temperature Cycle | 5 cycles −40°C ↔ +105°C |
| Exposure at Low Temperature | 24 hours at −40°C |
| Exposure at High Temperature | 1,000 hours at +105°C |
| Vibration | 10 to 2,000Hz, 196m/s², 12 hours |
| Shock | 980m/s², 6ms (18 times) |
| Rotational Life Expectancy | Approx. 100,000,000 shaft revolutions |
| Radiated Electromagnetic Field Immunity | 100V/m (80MHz ~ 6GHz, ISO11452-1~3) |
| ESD Immunity | ±4kV contact discharge ±8kV air discharge (Based on IEC 61000-4-2) |
Output Characteristics
Terminal Connection Diagram
Special Specifications Available
| Category | Description |
|---|---|
| Effective Electrical Angle | 90°, 180°, 270°, or arbitrary angles |
| Shaft Machining | Special machining on the shaft |
| PWM Output | Available upon consultation |
| Output Configuration | Cross output, parallel output, dual independent output |
| Mounting Option | Mounting flange |
Note: Rotational life expectancy may differ from specifications depending on actual usage conditions.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
