Drilling and Cutting, Japan, Unika
UNIKA TL/TLS Type T-Lock
Manufacturer: UNIKA
Model: TL type (Trivalent chrome treatment), TLS type (Stainless steel), Drill for T-lock (For extrusion molding plate)
- ■As the main body diameter and the plate width are the same, anchoring is possible by drilling from above the fixture.
- ■TLS type is completely made of stainless steel which is resistant to rust. Used extensively even in humid places.
Check necessary hollow width on the back of wall when installing.
| Thread diameter | Tightening torque |
|---|---|
| M6 | 2.5 N•m |
| M8 | 6.5 N•m |
| M10 | 10.0 N•m |
| M12 | 20.0 N•m |
Uses
Hollow wall•Extruded cement panel
- Drill holes of the determined preparation hole diameter.
- Insert the T-lock into the preparation hole.
- The plate becomes vertical and can be fixed.
- Tighten equipment with a nut to complete installation
■Uses
Installation of bracket, equipment and handrail.
- SPECIFICATIONS
TL type (Trivalent chrome treatment)\
| Size | Thread size | Dia(mm) |
| TL-630 | M6 | 7 |
| TL-640 | ||
| TL-650 | ||
| TL-835 | M8 | 8 |
| TL-840 | ||
| TL-845 | ||
| TL-850 | ||
| TL-855 | ||
| TL-860 | ||
| TL-865 | ||
| TL-870 | ||
| TL-875 | ||
| TL-880 | ||
| TL-890 | ||
| TL-810 | ||
| TL-1050 | M10 | 10 |
| TL-1070 | ||
| TL-1090 | ||
| TL-1010 | ||
| TL-1250 | M12 | 12 |
| TL-1270 | ||
| TL-1210 |
TLS type (Stainless steel)
| Size | Thread size | Dia(mm) |
| TLS-630 | M6 | 7 |
| TLS-640 | ||
| TLS-650 | ||
| TLS-840 | M8 | 8 |
| TLS-850 | ||
| TLS-860 | ||
| TLS-870 | ||
| TLS-880 | ||
| TLS-890 | ||
| TLS-810 | ||
| TLS-1050 | M10 | 10 |
| TLS-1070 | ||
| TLS-1090 | ||
| TLS-1010 | ||
| TLS-1250 | M12 | 12 |
| TLS-1270 | ||
| TLS-1210 |
Drill for T-lock (For extrusion molding plate)
| Size | Anchor size | Dia(mm) |
| TLD-7.5 | M6 | 7.5 |
| TLD-9.0 | M8 | 9 |
| TLD-11.0 | M10 | 11 |
| TLD-13.5 | M12 | 13.5 |
