Daiwa Kenko, Japan
Daiwa Kenko GB-03 / GB-02 Backfill Material


Manufacturer: Daiwa Kenko
Model: GB-03; GB-02
Backfill material
GB03

GB02

In the case of preload construction, the gap between the retaining frame and the retaining wall was dealt with by placing concrete, welding steel materials, etc., but recently, various filling blocks may be used.
The backfill material is a product that makes use of new ideas and conventional experience. Especially, it is considered to have a simple structure and reduce the number of parts.
By using this backfill material, it is possible to further reduce construction costs such as costs incurred due to loss directly, labor for dismantling construction, and disposal of industrial waste.

Features
The GB type backfill material has a simple structure that combines a wedge-shaped alloy becker and a wedge. By changing the mounting position of the hanger, it can be used for raising the abdomen from H250 to H400. * H500 can also be used as long as it is within the allowable load range.
The sub-plate is a reinforced plastic plate with a thickness of 15 mm. It can be used between a minimum of 46 mm (GB-03 is 55 mm) and a maximum of 130 mm.
* GB-02 when using 5 sub-plates / GB-03 when using 4 sub-plates


Strength Test

Example of use (Raised wall side)

GB-03 components
| Model No | GBOK (Wedge) | GBOVP (Alloy Becker) | GBOP (sub plate) | |
|---|---|---|---|---|
| Dimensions (mm) | 440 x 75 x 46 | 200 x 100 x 51.5 | 200 × 100 × 15 | |
| Weight (kg) | About 0.8 | About 0.95 | About 0.3 | |
| Material | Made of reinforced plastic | Made of reinforced plastic | Made of reinforced plastic | |
![]() | ![]() | ![]() | ||
GB-02 components
| Model No | GBOK (Wedge) | GBOV (Alloy Becker) | GBOP (sub plate) | |
|---|---|---|---|---|
| Dimensions (mm) | 440 x 75 x 46 | 200 x 100 x 36.5 | 200 × 100 × 15 | |
| Weight (kg) | About 0.8 | About 1.2 | About 0.3 | |
| Material | Made of reinforced plastic | Made of die-cast aluminum | Made of reinforced plastic | |
![]() | ![]() | ![]() | ||
Specification
| Model No | GB-02 | GB-03 | |
|---|---|---|---|
| Allowable load (KN) | 400 | ||
| Weight (kg) | About 2.9 | About 2.4 | |
| set content | GBOK (Wedge) x 1 GBOV (Alloy Becker) x 1 GBOP (Sub Plate) x 3 | GBOK (Wedge) x 1 GBOVP (Alloy Becker) x 1 GBOP (Sub Plate) x 2 | |
![]() | ![]() | ||
| Dimension | |||
| Remarks | Only the sub-plate is available as an option to the above set contents. | ||
Backfill material installation procedure manual
Optional parts sub-plate


Example of use with a raised cover plate



Related Products
-

Eight Tool EA-34 TORX
-

Ross Asia 27 Series Pilot Operated Check Valve Safety cat. 1 PL c, in-line mounting, with and without pressure relief
-

SAKUSAKU SC-1M-D Carbide Rotary Burr Cylinder Radius End Shape
-

NDV 2-stage open/close type: FPN3100 (05TN-12TN) Special-use products and related products
-

Chiyoda Kogyo EX-1200 / EX-1200-1DR CNC Tube Bender
-

Isolite Insulating Fibermax Blanket













