Japan
YP Jose Punch
Product Made In Japan
Model: YP Series
A punch for aligning holes in shaped steel and iron plates with holes made with punches and dies. Rivets of stacked shaped steel and iron plates
It is used for hole alignment before fixing with bolts.
| Model | Size × D × L × d1 × d2 × L1 × L2 × L3 | Weight (g) |
| 16mm/YP-16 | 16 x 19 x 160 x 9 x 14 x 90 x 45 x 25 | 250 |
| 19mm/YP-19 | 19 x 22 x 180 x 10 x 16 x 100 x 55 x 25 | 400 |
| 22mm/YP-22 | 22 x 25 x 200 x 12 x 18 x 115 x 60 x 25 | 600 |
| 25mm/YP-25 | 25 x 28 x 220 x 14 x 22 x 135 x 60 x 25 | 750 |
| 28mm/YP-28 | 28 x 32 x 240 x 16 x 23 x 150 x 60 x 30 | 1100 |
| 32mm/YP-32 | 32 x 36 x 260 x 17 x 28 x 165 x 65 x 30 | 1450 |
It is safe to select about 1/3 of the taper part (L1) from the body part (D) so that it matches the hole diameter.
● Material S45C / quenching hardness HRC40
Related Products
-
SAKUSAKU SDHR21125253 Holder For Grooving/Turning
-
Saitamaseiki AK-S6 Impact Drivers and Impact Wrenches
-
Vessel No.SJ-00HR Electrode needle unit
-
NDV Manual valve E300N-T4/L4 type 3-Way Ball Valves (E300 type)
-
Kimoto Blowing thickness measurement measure 20cm Slope and furnace spraying construction materials
-
Nitta 1500 Series Thermoplastic Hose
