Air Preparation Equipment, Japan, KONAN ELECTRIC
KONAN 380-3075 Electric Regulators
Product Made In Japan
Manufacturer: KONAN
Model: 380-3075
Model Code
Features
Assured safety
● The set pressure will not change even if the motor is turned off.
Safe design
● The upper limit switch automatically stops the motor, preventing supply at an excessive pressure if the pressure rises above a given level.
Multifunction design
● In combination with a booster relay, the regulator can control the pressure of large-flow Imes.
Specification
Outside Dimensions
Applications
The electric regulator is best suited to the following applications:
– Remote pressure control from central control rooms, etc
– Pressure control in confined places and where access is difficult.
– Pressure control is hazardous places.
Operating Instructions
1. Fluid
● Use the regulator with clean fluids only. Dirt, waste, etc. in the fluid may cause regulator malfunction.
2. Wiring
● A limit switch is provided to prevent the motor iron running out of control. Wire the regulator so that the motor stops if the limit switch operates.
3. Piping
● Since it is difficult to set the regulator for pressure at high loads, make the piping as short as possible.
4. Pressure
● Set the pressure while observing the pressure gauge.
- Kouei is a Distributor/Agent for KONAN.
- Other items of KONAN.
- Request the quotation for KONAN.
Related Products
-
Eagle Jack (Konno Corporation) G-160TLC Hydraulic Claw Jack
-
TSUBOSAN Round Engineer’s Files
-
Senyo HV-42/HV-70 Triangular Vise Manual Type
-
Kansai Electric Heat Corp XS-3B-3MPa Hot-Air
-
DIJET DNMG150604R-SG, DNMG150604L-SG, DNMG150608R-SG, DNMG150608L-SG Light To Medium Cutting Insert For Stainless Steel
-
Saitamaseiki AK-62W Orbital sanders, wet sanders