Japan, Kurimoto
Kurimoto CFM-16 Forging Press
Product Made in Japan
Manufacturer: KURIMOTO
Model: CFM-16
Distinct from “Custom-made” model of C2F, CFM series are developed as a “Standard” model, with the same level of “Performance” and “Quality” and even better for “Reasonable Price” and “Maintainability”.
Features
To be compact
CFM-16 was designed to be compact its height by simplified the structure of LKM-1600.
Environmental-friendly equipment
Oil-type lubricant is adapted to drive-side and gibs, and it is collected after use and can be re-used.
Pursuing more precise forging products
The steel plate-frame of CFM-16 is divided into 3 frames, and those are tighten together by tie rods, and that makes a rigid structure. The slide is supported by 2 connecting rods that allows wider permissible range of eccentric load. Also the 8 guide gibs prevent and minimize the tilting of the slide.
Shorten the downtime
It is easy to set the slide adjustment device on the operation panel. It also can be used to release the sticking by increasing the hydraulic pressure on the lift side.
Improve the productivity
It can be converted to “Automatic” Forging press, by adding optional transfer system “TES-25” or “TES-R”.
Improve the maintainability
The friction block type of brake is adapted that has a characteristics of long-life and easy to maintenance.
How to replace?
Die set
Because CFM-16 was developed to replace for LKM-1600, original die set of LKM-1600 can be used to CFM-16 without any modifications.
Foundation
For CFM-16 installation, current foundation and foundation bolts of LKM-1600 can be re-used by attaching the garters.
Capacity: 16MN (1600 ton)
Sample Forging Parts: Golf Head
Specification
Related Products
-
Chiyoda Seiki AC-60 Medium Flow Rate, Self-powered Pressure Regulator/Large Flow Rate, Pilot Type Pressure Regulator (primary pressure: 3.0 MPa or less/adjustment pressure 0.01 to 0.1 MPa, standard flow rate: 80,100 m3/h・Air)
-
Hasegawa Electric HXA-30 Hot Line Proximity Detector Exclusively For Overhead Line Works
-
Eagle Clamp VAF Type Clamp for Horizontal Steel Plate
-
Kakuta No.X13 Hold Down Clamp
-
Seiwa E04RC181029 RC, RM and RMX Types Non-split Cores
-
Ascon BS-1/BS-2 General-purpose manual machine (suction type) Blast Cabinet