Japan, Obishi Keiki
Obishi Keiki Seisakusho Repeat Meter
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Stock No : 216
- Measurement of Surface Plate Flatness, Straightness etc can be done easily.
- At 3 points of the fulcrum interval 100mm, flat surface unevenness is measured
- Before measurement, perform zero setting on the master surface plate.
*Dial Gauge is sold separately.
Main Equipment
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Measurement Pitch (mm) | Mass (kg) |
|---|---|---|---|---|
| CB101 | 200 | 240×60×90 | 100 | 4.5 |
Master Surface Plate
| Code No. | Nominal Measurement | Measurement (L×W×H mm) | Flatness (μm) | Mass (kg) |
|---|---|---|---|---|
| CB102 | 300 | 300×75×150 | 1 | 10 |
Related Products
-
Kondotec K Type Scaffolding Chain
-
Eight Tool TXN-6 TORX
-
Kansai Kogu D Portable Band Saw 12/16
-
YOSHITAKE VB-7 Vacuum Relief Valve
-
DAIA SDF-19B0 Face Cutter
-
Chiyoda Seiki BHSS-4PM Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
REQUEST QUOTATION
PAYMENT
LINK
