Japan, Tokyo Keiso
Tokyo Keiso P-010 Purgemeter
Made in Japan
Manufacturer: Tokyo Keiso
Model: P-010
The P-010 is a lot production version of the popular P-100. Although measuring fluids are limited to water, air, and nitrogen, the P-010 is ideal if more than 10 units with the same specifications are required. Laser inscription of graduations on the convex surface makes reading easier.
Major Applications
General purpose (for small flow rates, water lines and air/nitrogen lines)
Specifications
Measuring fluid | Gases(air/nitrogen) Water |
Measuring range | Air: Min. 0.1 to 1 L/min (nor) Max. 5 to 50 L/min (nor)Water: Min. 5 to 50 mL/min Max. 0.4 to 2 L/min ·When selecting a flow range, refer to “Index& Quick Reference for P Series Purgemeters” (TG-S0001). |
Range ability | 10 : 1(10 : 2 for some models) |
Indication accuracy | ±5% F.S. |
Fluid pressure | Max. 0.8MPa |
Fluid temperature | Max. 120°C (Depends on the gasket material) |
Material | Wetted part: SCS14/SUS304 Tapered tube: Heat-resistant glass Gasket: Nitrile rubber (NBR) (Max. 80°C) Fluor rubber (Max. 120°C) ·The maximum fluid temperature for each gasket material may vary depending on usage and ambient conditions.Side plate: A6063-T5 Front panel: ABS Scale plate: Polycarbonate |
Process Connection | Rc: 1/4″(Standard) NPT: 1/4″ |
Mounting | Lock nut mount on the panel front (Standard) |
Mass | approx. 0.35kg |
Related Products
-
SUGIYASU ST50 Hydraulic Stacker
-
Kyowa ASH-A-500 ASH-A Small-sized High Frequency Response Acceleration Transducer
-
YOSHITAKE AL-50 Safety And Relief Valve
-
Super Tool KP17-55 Offset Wrench (With Corn Shaped Spear, 60° Type)
-
Niigata Seiki DL-S4W SERIES LEVELNIC
-
Chiyoda Seiki SV-30-1/2 Low Pressure Stop