Japan, Tokyo Keiso
Tokyo Keiso CDT3000 Series Calorie Monitor
Made in Japan
Manufacturer: Tokyo Keiso
Model: CDT3000
The CDT3000 calorie monitor consists of a pitot tube type flow element with a built-in temperature sensor and a differential pressure instrument equipped with root extraction and calorie calculation functions. By inputting an external temperature signal and calculating temperature difference, it indicates and outputs thermal flow and totalized calorie in addition to flow rate. Applicable pipe size ranges from 20 mm to 450 mm.
Features
- Easy installation by welding a 20 mm, 3/4 inch socket on exist ing piping for insertion of CDT3000
- Simultaneous measurement of both flow and temperature saves your installation cost
- Negligible small pressure loss
- Selectable from wide variety of flow meter ranges suitable for your applications
- Applicable for both horizontal and vertical pipes
- By inputting temperature signal on the fluid feed line it allows thermal flow measurement and totalized calorie calculation to serve as a calorie monitor for your energy conservation
- Easy to read with a large LCD display
Specifications
Measuring fluid | Water, Cold Water, Hot water |
---|---|
Flow Range | Max. 150 to 1500 m³/h Min. 0.9 to 9 m³/h |
Fluid Pressure | Max. 2.0MPa (Max. allowable differential pressure: 700kPa) |
Fluid Temperature | -10 to 80°C |
Pipe size | 200mm to 450mm |
Process Connection | R3/4 Male |
Power Supply/ Output |
DC24V±10% / Current output Pulse output Alarm output |
Material | Pitot tube: SUS316 Isolation valve: SCS14 Body: SUS316 Diaphragm: SUS316L O-ring: NBR |
Construction | IP65 |
Accuracy | ±5% F.S. |
Related Products
-
Kyowa ST-1A Connector Set for Coupling PCD-400A Sensor Interface
-
Yutani HG-65GLBSC Straight Grinders (Collet Type)
-
Tosei Sharyo GLM 200V Series Mechanical Lift
-
Ross Asia 15 Series Lockout LOX Valve Safety cat. 1, PL c, manual LOX valve
-
TOKU MI-38EXL Impact Wrenches
-
Vessel No.300002 Wire Stripper Cardbord product (For Solid Wire)