Japan, UHT CORPORATION
UHT CORPORATION MP-□□□□Z series MULTI PUNCHING MACHINE FOR CERAMIC GREEN SHEET-Z
Made in Japan
Manufacturer: UHT CORPORATION
Model: MP-7150Z / MP-8200Z
Features
- High speed, high precision punching fine holes
・Speed: 1000 holes/min (on PU-25L unit, conventional ratio: about 1.6times) Accuracy ±10μm. - Machines suitable for trial manufacture, variety kinds of productions in small rot or medium mass-production are developed.
・Processing area and punch shaft number are selectable from 6 types of machines. □ 7 shafts is selectable for 150 mm processing area.
□ 8 shafts is selectable for 200 mm processing area.
・Combination of loader module and unit is multiple. - Various types of units and punching methods are available.・Initial costs and running costs are reduced.
・Processing methods suitable for reference hole, micro diameter, gang, and grid are developed.
・Air electric driving type punching suitable for processing is introduced. - Graphical touch panel materializes easy operation.
- Compact design contributes to reducing space.
Characteristics
- XY robot
Maintenance-free AC servo motor has been adopted as an actuator. The specially built finger has removed deflections during machining by firmly fixing the work holder. High precision and high feed speed of 30m per minute has been realized by one micron per pulse and simultaneous biaxial feed. Machining time can be reduced a great deal. - Automatic peripheral equipment (O.P.)
Built-in units and outside modules are available depending on production of roll or sheet. - MJUC controller
Introduction of page type graphic touch panel enables easy operation. Control function, such as punch and die - CCD camera unit
Two different view cameras are installed. This unit enables simple positioning for replacing punch unit, and centering of work coordinate and correcting rotation by image processing. - Control PC (option)
- The system can be flexible to achieve rationalization and labor-saving including the network capability with up to 14 stations by one control PC. Operation procedure will be displayed in a way easy to understand according to programs such as coordinates entry, saving/reading files and punch pattern verification by graphic display.
- Punch unit (PAT)
Slide and clamp method is used to load the unit for easy loading, unloading and changing.
Various units suitable to perforating quality and patters
- High speed, fine, perforating type 1axis/gang mold type
- Simultaneous perforating grid of a pattern
- High accurate perforation available by micro type Flexible unit enables multi-combination. Servo type with high speed punching
Standard Specifications
Model | MP-7150Z | MP-8200Z | |
---|---|---|---|
Workpiece | Material | Ceramics Green Sheet | |
Work Thick | t:Max1.0mm | ||
Punching Area | Max:□150mm | Max:□200mm | |
Standard Work Holder | □224mm×t0.4mm | □274mm×t0.6mm | |
Attachment(How to attach) | V/F clamp | ||
The Number Of The Punch Units PU-25 loading shaft | 7axis | 8axis | |
Decided by you (ref. available unit table) | |||
Machining(Processing) | Punching Accuracy | ±10μm(2 points(R) of alignment marks (tooling punch holes) are image-processed in the standard punching range using UHT test film. Relative position accuracy while positioning and processing on the basis of a center between 2 marks.) | |
Resolve Capacity | 1μm/1Pulse X.Y axis | ||
Punching Speed | Max.1000 holes/min(on PU-25L),Max.600holes/min(on PU-25)(NC machining at 1mm pitch in X direction. Variation depending on process,material and condition.) | ||
The number of the processing position memories | 1file(30000 positions) | ||
Dust removal | Triple dust collectors with two operating methods switchable – intermittent,continuous- | ||
Control Function | Control unit | UHT make controller exclusively for mechanism control | |
Operathion | Graphical display by 6.5″ TFT color liquid crystal | ||
Dedicated interactive | Software on PC (lndependent of the main body) | ||
Network | Transmission of machining datafrom PC to the machine through LAN Centralized monitoring of the machine operating condition (up to 14 units) on PC | ||
Power Source | 3φ.200VAC ±10% Electric power of main unit is 600VA. | ||
Air Source | 0.4~0.7MPa | ||
Machine Size | W | 830mm | 955mm |
D | 1200mm | 1280mm | |
H | 1600mm | ||
Machine Weight | 620kgf | 670kgf | |
Working condition | Temperature10~35℃(22±2℃ recommended) Humidity40~60%(anti-dewing) |
OPTIONAL
Autoloader
- module
- Stack Loader, Unloader(ST-150、ST-200)
- Stack Loader(ST-150L、ST-200L)
- Stack Unloader(ST-150U、ST-200U)
- Roll Cutting Loader(RC-150、RC-200)
unit
Slide loader Elevator loader
Clamp method
Work holder clamp is standard(V/F). 3 point supporting, direct clamp, and adsorption clamp are available.
θ finger
θ finger enables θ correction of work.
Area sensor
Checking is done by the area censor in front of the machining portion. When the sensor detects a part of hands or something that blocks while the machine is working, it stops the machine. It ensures high quanlity of safety, just in case.
Punch unit
According to type or size of mold, air type unit or motor-driven unit, for width between 25 to 150 mm, is selectable. Low cost mold is available.
Various types of molds
For every condition, modified mold or multiple pin (gang, grid) mold are available.
Punch setter
CCD camera enables to see multi-directions by rotating and materiadivzses compact setter. Mold fitting is easy through the monitor. Kit type setter, such as square
Lift car
Heavy punch unit can be easily moved or changed by drifting it . It contributes to reducing changing time and safe work environment.
Outline Drawing
Related Products
-
Nippon Chemical Screw PTFE/W(d-D-t) PTFE/Washer
-
KONAN NH-NDK Series Refrigerated Air Dryer (After-cooler Built-in Type)
-
Nippon Chemical Screw RENY/ZB(M) RENY/thin bolt
-
Fukudaco Lecureux Precision Torque Electric Screwdriver
-
IMADA HT-DC series Pin Chuck
-
Kurimoto Elbow And Y-shaped Pipe For Coal Ash (High-Chromium Cast Iron)