- Home
- Products
- Kyowa NTB-100B-350 Constant Voltage Bridge Power Supply with One Touch Terminal, for 350Ω NTB-100/200 Series Network Terminal Box
Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa NTB-100B-350 Constant Voltage Bridge Power Supply with One Touch Terminal, for 350Ω NTB-100/200 Series Network Terminal Box
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: NTB-100B-350 Constant Voltage Bridge Power Supply with One Touch Terminal, for 350Ω
- CAN-compliant network output, so connection is one cable
Transmission with noise-resistant digital signal - Compact and lightweight for easy on-site installation
Feature
A distributed data logger that digitizes signals from sensors and processes them directly on a PC. One unit can be connected to 1 units with 4 channels, and up to 99 channels can be measured (when connected to a PC).
Specification
Measurement object | Strain gauge, strain gauge transducer 1 gauge method 350 Ω 2 gauge method 120Ω~1000Ω Active active method 4 gauge method 120Ω~1000Ω Full bridge method |
---|---|
Number of input channels | 4 |
Scanning Speed | Approx. 0.5 sec/channel: 0~±30000×10−6Strain approx. 1 sec/channel: ±30000×10−6When measuring more than strain |
Bridge Power Supply | Constant voltage bridge power DC approx. 2V |
Measuring range | 0~±300000×10−6Strain (constant voltage bridge power supply) |
resolution | 0~±30000×10−6Strain: 1×10−6Strain ±30000~±300000×10−6Strain: 10×10−6Strain |
precision | 0~±30000×10−6Strain: ± (0.05% of reading value + 2)×10−6Strain ±30000~±300000×10−6Strain: ± (0.1% of reading value + 20)×10−6Strain |
TEDS | There is a read function from the TEDS sensor and a write function of channel name (when the Manufacturer ID is Kyowa) |
Power save function | Yes, the power save function can be selected on / off with the “OPT.3” DIP switch. |
interface | Dedicated interface (CAN compliant) cable length up to 1 km |
Operating temperature and humidity range | -10~50°C, 20~85%(non-condensing) |
power | DC 11~16V |
Current consumption (at 12V DC operation) | When measuring a constant-voltage bridge power supply : 100 mA or less, standby: 60 mA or less: 40 mA or less(when the power save function is enabled) |
External dimensions | 150(W)×28(H)×55(D)mm (excluding protrusions) |
mass | Approx. 310g |
Standard Accessories | DC Power Cable P-76 Ground Wire P-72
Wire Connecting Wire Seal |
---|---|
Sold separately | Y cable N-103 (10cm) communication cable N-102 (1m) communication cable H-11681 (3m) communication cable H-11682 (5m) communication cable H-11683 (10m)
* For |
Dimensions
Related Products
-
Chiyoda Tsusho LE-6/8/10/12 L-FLEX TUBING ANTI-SPATTER PUR TUBING
-
Kyowa Expander Block
-
Kikusui Tape 108H Kraft Paper Adhesive Tape (White)
-
IMADA DST series Simple type digital force gauge
-
TSURUMI PUMP PARTS:CAPACITOR 28MF 220VAC Parts & Accessories
-
Kyowa LSM-B-50NSA1 LSM-B-SA1 3-component Force Transducer