Japan, Kyowa Electronic Instruments Co., Ltd.
Kyowa DTP-E-1KS DTP-E-S Drip Proof Large-capacity Displacement Transducer
Made in Japan
Manufacturer: Kyowa Electronic Instruments Co., Ltd.
Model: DTP-E-1KS
The DTP-E-S is a potentiometer type displacement transducer with drip proof for measuring displacement by extending or contracting wire.
Features
• Connectable to strain amplifier for measurement
• Degrees of protection: IP67 (IEC 60529)
Specifications
Performance
Rated Capacity | 1000 mm |
---|---|
Nonlinearity | Within ±1% RO |
Hysteresis | Within ±1% RO |
Rated Output | Approx. 5 mV/V |
Environmental Characteristics
Compensated Temperature | -10 to 60ºC |
---|
Electrical Characteristics
Detection Method | Potentiometer |
---|---|
Safe Excitation | 10 V AC or DC |
Recommended Excitation | 1 to 5 V AC or DC |
Input Resistance | 350 Ω ±5% |
Output Resistance | 350 Ω ±5% |
Cable | 4-conductor (0.5 mm2) chloroprene shielded cable, 9.6 mm diameter by 3 m long, bared at the tip (Shield wire is not connected to the case.) |
Mechanical Properties
Safe Overloads | 120% |
---|---|
Measuring Force | Approx. 4.9 N |
Cycling Life | 104 times |
Degree of Protection | IP67 (IEC 60529) |
Frame | Stainless |