Japan, Nippon Chemical Screw
Nippon Chemical Screw CA/BT(M-L) CA/hex bolt
Made in Japan
Manufacturer : Nippon Chemical Screw
Model :CA/BT(M-L)
Ceramic (alumina) hexagon bolt.
| Continuous use temperature | 1500°C/2732°F |
| M | M3 | M4 | M5 | M6 | M8 | M10 | |
| pitch | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | |
| B×H | 5.5×2 | 7×2.8 | 8×3.5 | 10×4 | 13×5.3 | 16×6.4 | |
| L(mm) | 5 | 10 | 10 | ─ | ─ | ─ | ─ |
| 6 | 10 | 10 | ─ | ─ | ─ | ─ | |
| 8 | 10 | 10 | 10 | ─ | ─ | ─ | |
| 10 | ─ | 10 | 10 | 10 | ─ | ─ | |
| 12 | ─ | 10 | 10 | 10 | 10 | ─ | |
| 14 | ─ | ─ | 10 | 10 | 10 | 10 | |
| 16 | ─ | ─ | 10 | 10 | 10 | 10 | |
| 20 | ─ | ─ | ─ | 10 | 10 | 10 | |
| 25 | ─ | ─ | ─ | ─ | 10 | 10 | |
| 30 | ─ | ─ | ─ | ─ | ─ | 10 | |
We use raw materials that are RoHS2 compliant.
Features
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
-
Eight Tool TD Driver
-
Musashino GR-CH Type Medium Pressure Gear Pump (Medium Pressure Large Hydraulic Pump)
-
Hammer Caster 420 EN / 415 EN 40-75mm Caster
-
Tosei Sharyo GLF Wide Leg Series Hydraulic Lifter
-
Seiwa E04FD130506 Ferrite Cores for FPC FD Type EMC Products
-
Niigata Seiki PM SERIES STEEL PIN GAUGE SET
REQUEST QUOTATION
PAYMENT
LINK
