Japan, Nippon Chemical Screw
Nippon Chemical Screw PEEK/SN(M-L) PEEK/spacer nut
Made in Japan
Manufacturer : Nippon Chemical Screw
Model : PEEK/SN(M-L)
polyetheretherketone spacer nut.
| Continuous use temperature | 260°C/500°F |
| Combustion quality | UL94V-0 |
| M | M3 | M4 | M5 | M6 | M8 | |
| pitch | 0.5 | 0.7 | 0.8 | 1 | 1.25 | |
| B | 6 | 7 | 8 | Ten | 13 | |
| L(mm) | 4 | 100 | ─ | ─ | ─ | ─ |
| 5 | 100 | 100 | ─ | ─ | ─ | |
| 5 | 100 | 100 | 100 | ─ | ─ | |
| 8 | 100 | 100 | 100 | ─ | ─ | |
| 10 | 100 | 100 | 100 | ─ | ─ | |
| 12 | 100 | 100 | 100 | ─ | ─ | |
| 15 | 100 | 100 | 100 | 100 | ─ | |
| 18 | 100 | 100 | 100 | 100 | ─ | |
| 20 | 100 | 100 | 100 | 100 | 50 | |
| 25 | 100 | 100 | 100 | 50 | 50 | |
| 30 | 100 | 100 | 100 | 50 | 50 | |
| 35 | ─ | 100 | 100 | 50 | 50 | |
| 40 | ─ | ─ | 100 | 50 | 50 | |
| 50 | ─ | ─ | ─ | 50 | 50 | |
Sales unit Quantity
Torsional rupture torque
| ─ |
Tensile rupture force
| ─ |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior.
- The remaining gate at the screw tip is less than 5% of the length (L).
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
Related Products
-
Obishi Keiki Seisakusho Cast Iron Granite 2D Straight Edge
-
Nippon Chemical Screw PEEK GF30/PH(M-L) PEEK/GF30(+) Pan head machine screw
-
Nagasaki Jack NWD-450GHA/450GHB Standing wheel dolly
-
DIJET G Body Multi Extreme Facemill HF Type
-
Mikasa Branch Cord
-
Chiyoda Tsusho MC-05PM/MC-10PM MICRO COUPLING PLUG
