Cutting, Japan, Toyo Kensetsu Kohki
TOYO KENSETSU KOHKI TFC-M-H AUTO REBAR CUTTING
Products Made in Japan
Manufacturer: TOYO KENSETSU KOHKI
Model: TFC-M-H
Features
- AUTO REBAR CUTTING
- Bar (Small)
- Bar (Large)
- Reduce manpower
- High strength rebar processing
- Noiseless spec.
- Rebar fabrication
- Precast concrete
| Model | TFC-M-H |
|---|---|
| Capacity | SD390： D10-16 ～ D38-1 SD490： D10-16 ～ D38-1 |
| Required breaker capacity | 75A |
| Cutting blade width | 190mm |
Machine & Processing
Speciffications
| Specifications | TFC-M-H (10×12・MC-51W) |
| Required breaker capacity | 75A |
| Applicable length of raw material | 3,500~12,000mm |
| Cutting length range | 1,050~10,000mm When product discharging unit is not attached ; 500mm~ When stopper for short dimension is attached; 300mm~ (Optional) |
| Cutting blade width | 190mm |
| Conveyor effective width | 185mm |
| Material feeding speed on conveyor | 54.0/64.7 m/min (50/60Hz) |
| Total motor capacity | 8.35kW(including air-compressor) |
| Dimensions (LXWXH) | 23,200×2,650×1,450mm |
| Total weight | 5,900kg |
| Rebar diameter | D10 | D13 | D16 | D19 | D22 | D25 | D29 | D32 | D35 | D38 |
| SD390 | 16 | 12 | 10 | 7 | 5 | 4 | 3 | 2 | 1 | 1 |
| SD490 | 16 | 12 | 10 | 5 | 4 | 3 | 2 | 2 | 1 | 1 |
Details
・When you consider automation into rebar cutting, let us introduce TFC-M-H.
・TFC-M-H turns the hard work of material handling and discharging into an automatic way.
・TFC-M-H is equipped with a special conveyor, which reduces the noise in feeding material.
・Rebar cutter Model : MC-51 is equipped.
※TFC-M-H is capable of cutting up to D38 with SD490(Yield Point: 490-625N/mm2, Tensile Strength≧620N/mm2).
・Cutting blade width is 190mm, which enables you to cut 10 pieces of D10 at at time.
・3 types of conveyor length are available; 8m(Feed-out side)x 9m (Feed-in side), 10mx 10m, 12mx 12m. ”
