Japan, Kansai Electric Heat Corp
Kansai Electric Heat Corp SUS High-Blow Nozzle
Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SUS
Specification
| Model | 50SUS | 65SUS | 75SUS | 100SUS | 125SUS |
| Bore of the inlet | φ50 | φ65 | φ75 | φ100 | φ125 |
| Adjustment range of slit width | 0.5 – 1.5mm | 1.0 – 2.0mm | 1.0 – 2.mm | 1.0 – 3.0mm | 1.0 – 4.0mm |
| Adjustment range of slit width | |||||
| Manufacturable | ･200mm – 1000mm | ･300mm – 1900mm | ･300mm – 1900mm | 500mm – 2400mm | 500mm – 2400mm |
| slit length | at slit width 0.5 – 1.0mm | at slit width 0.5 – 1.0mm | at slit width 0.5 – 1.0mm | ||
| ･300mm – 1000mm | ･300mm – 1500mm | ||||
| at slit width 1.1 – 2.0mm | at slit width 1.1 – 2.0mm | ||||
| Efficient use air-speed | ･25m/s – 120m/s | ･25m/s – 120m/s | ･50m/s – 150m/s | ･50m/s – 150m/s | ･25m/s – 150m/s |
| at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | at slit width 1.0mm | |
| ･25m/s – 100m/s | ･25m/s – 100m/s | ･25m/s – 80m/s | ･25m/s – 80m/s | ･25m/s – 100m/s | |
| at slit width 1.5mm | at slit width 2.0mm | at slit width 2.0mm | at slit width 2.0mm | at slit width 2.0mm | |
| ･25m/s – 50m/s | ･50m/s – 100m/s | ||||
| at slit width 3.0mm | at slit width 3.0mm | ||||
| ･50m/s – 75m/s | |||||
| at slit width 4.0mm | |||||
| Heatproof temp. | Less than 350C | ||||
| Resisting pressure | Less than 49kPa | ||||
| Accuracy rating | Disorder of the air-speed of the right and left is less than plus minus 5% | ||||
Related Products
-
UHT Corporation No.1 Borazon Grinding Wheels For Spindle
-
H.H.H Hook EX (Without Latch) EL (With Latch)
-
UNIKA E&S FC Single-function Core Drill For Compound Materials
-
Chiyoda Seiki EX-100-PM Excellent Panel Mount (Primary pressure: 20.0 MPa or less/adjustment pressure 0.1 to 1.0 MPa, maximum flow rate: 50 ℓ, 150 ℓ/min・Air)
-
TONE 400M Hexagon Socket Wrench Set
-
Daiichi Keiki PS Series Sanitary Pressure Gauge
REQUEST QUOTATION
PAYMENT
LINK
