Japan, NAGANO KEIKI
NAGANO KEIKI CL11 Differential Pressure Switch

Made in Japan
Manufacturer: NAGANO KEIKI
Model: CL11 Differential Pressure Switch
This is a pressure gauge which has been designed to measure minute differential pressure of 2 kPa(200 mmH2O) or smaller. For the contactor, a microswitch rich in application and with high reliability has been applied.
Features
+This gauge is appropriate for measuring minute differential pressure.
+To output a large driving force by equipping a large diameter diaphragm, this pressure switch is equipped with a relatively large rating microswitch.
+A 60 DIA. setting indication dial is built in, and the setting is easily performed by the setting knob.
+Electric parts including a microswitch. etc. are separately installed from measuring liquid by a seal bellows.
Visit Site
*Using This Differential Pressure Switch If the pressure larger than differential pressure is applied to the one pressure connecting port, the mechanism of the differential pressure switch will be damaged. So, careful attention is required. Especially at the time of starting and finishing, this type of phenomena can occur. Therefore, a bypass cock or a bypass valve is recommended.
+To output a large driving force by equipping a large diameter diaphragm, this pressure switch is equipped with a relatively large rating microswitch.
+A 60 DIA. setting indication dial is built in, and the setting is easily performed by the setting knob.
+Electric parts including a microswitch. etc. are separately installed from measuring liquid by a seal bellows.
Visit Site
*Using This Differential Pressure Switch If the pressure larger than differential pressure is applied to the one pressure connecting port, the mechanism of the differential pressure switch will be damaged. So, careful attention is required. Especially at the time of starting and finishing, this type of phenomena can occur. Therefore, a bypass cock or a bypass valve is recommended.
Related Products
-

Seiwa E04FD110510 FD Type Ferrite Cores for FPC
-

Kaneko Sangyo M65G Series Four-Way Solenoid Valve (Single)
-

Sawada Y-20A/ Y-25A/ Y-32A/ Y-40A/ Y-50A – Y type blow valve (piston valve)
-

HANKOKU Backup Power Unit
-

Japan Life FCI Insert For Concrete Works (For Scafford On Bridge, Wheel)
-

Sawada RG-200NH type Level gauge – Two-color Level Gauge





