Act Electric Industry Pressure Monitor and Sensor

Product Made In Japan
Model: Pressure Monitor and Sensor
Manufacture: Act Electric Industry

Features

●Pressure sensor driven by DC5.0V stabilized power supply.
●No pressure is required when pre-set the upper and lower pressure settings.
●Durable lifecycle for LED monitor displace.

Specification

Digital Pressure Monitor

Series	DPM35-AC1OO/25OV-5R
Pressure Display Range	0~35MPa Contact us for unit other Mpa
Input Voltage	0.5-4.5V
Input Impedance	51KΩ
Sampling Rate	Standard: (2 times/sec). * Option: (5 times/sec). (10 times/sec )
Display	3 digits LED (Light-Emitting Diode)
Display Accuracy	±0.1MPa
Output System	Photo relay output 60V-120mA(max.)
Pressure Setting	Total of 4 switch contacts high (HI) and low (LO) limits by 2 channels (individual setting)
Pressure Setting System	Setting display selected by mode S/W and adjusted by push button
Pressure Setting Accuracy	±0.1 MPa
Switch output response time	Less than 10ms
Pressure Alarm	36.8MPa Maximum indication flash at 36.8 MPa
Power Supply for Sensors	DC5V±0.01V
Ambient Temperature	0-50°C
Ambient Humidity	Less than 85% RH
Power Supply	AC 85~264V(50/60Hz)
Power Input	9.2VA(Max)
Mass	about 220g

Sensor

Series	ATS35-02-10
Maximum Working Pressure	35MPa (Surge pressure must not exceed 51.5MPa)
Rated Pressure Range	0~35MPa
Output Range	0.5-4.5V
Power Supply	DC5.0V±0.5V
Current Consumption	Less than 10mA DC
Output Ripple	±30mV
Load Resistance	More than 10KΩ
Insulation Resistance	More than 100MΩ (50V DC)
Overall Accuracy	±0.5% F.S.
Temperature Drift	±0.02% F.S./1ºC
Ambient Temperature	-20—+100ºC
Vibration Resistance	147m/s2 <15G>
Protection Class	IP65
Mass	190g (approx. 2m cable)