AirTAC
AirTAC DPH Series Digital Display Pressure Sensor Analog Output
Product Made in Japan
Manufacturer: AirTAC Co., Ltd.
Model: DPH Series
Specification
| Model | DPHN2(3)(B)-01 / DPHP2(3)(B)-01 / DPHN2(3)(B)-10 / DPHP2(3)(B)-10 | |
|---|---|---|
| Input power | Voltage | 12-24 VDC ± 10% Ripple(p-p) < 10% |
| Current Consumption | 40mA or less | |
| Pressure range | Fluid | Non-corrosive gas |
| Measurement range | DPHN2(3)(B)-01/DPHP2(3)(B)-01 : -15psi~15psi | |
| DPHN2(3)(B)-10/DPHP2(3)(B)-10 : -15psi~150psi | ||
| Withstand pressure | DPHN2(3)(B)-01/DPHP2(3)(B)-01 : -15psi~22psi | |
| DPHN2(3)(B)-10/DPHP2(3)(B)-10 : -15psi~175psi | ||
| Measurement error | ±2%F.S., ±1 digit (Temperature: 25±3°C) | |
| Repetitive accuracy | ±0.2%F.S. | |
| Temperature error | ±3%F.S. (Base 25°C, Range 0 to 50°C) | |
| Display | Type | 4-digit measurement, 3.5-digit setting |
| Output | LCD Analog and Double row LCD display | |
| Color | 2-color LCD (Red/Green) | |
| Switch Output | Output model | Basic mode, Hysteresis mode, Window comparator mode, Suction check mode, Leakage mode |
| Transistor output | NPN: Maximum applied voltage 30V/100mA, Retained voltage < 2V | |
| PNP: Maximum applied voltage 30V/100mA, Retained voltage < 2V | ||
| Analog Voltage Output | 1 to 5V ±3% F.S. (Minimum load impedance 1 kΩ) | |
| Analog Current Output | 4 to 20mA ±3% F.S. (Range of Load impedance is 50 – 2600Ω) | |
| Output-delay time | 2ms, 20ms, 100ms, 500ms, 1000ms, 2000ms | |
| Pressure Unit | DPHN2(3)(B)-01 DPHP2(3)(B)-01 | kPa, kgf/cm², bar, psi, mmHg, inHg |
| DPHN2(3)(B)-10 DPHP2(3)(B)-10 | MPa, kPa, kgf/cm², bar, psi, cmHg, inHg | |
| Vibration resistance | 10 to 500Hz with 10mm Amplitude in X, Y, Z directions for 2hrs | |
| Impact resistance | Maximum 100m/s², X, Y, Z directions 3 times each | |
| Operating Temp. range | 0-50°C | |
| Stored Temp. range | -20-65°C | |
| Humidity range | 35%~80% RH (No condensation) | |
Ordering Code
Dimensions
Accessories
| No. | Item |
|---|---|
| A | Value up button |
| B | Setting button |
| C | Value Down button |
| D | Pressure display area |
| E | Set pressure display area |
| F | Output 1 indicator light |
| G | Output 2 indicator light |
| H | Power and signal connector |
| I | Pressure input |
| 1 | DC(+) input (Brown) |
| 2 | OUT1 (Black) |
| 3 | OUT2 (White) |
| 4 | Analog/Zero (Orange) |
| 5 | DC(-) input (Blue) |
REQUEST QUOTATION
PAYMENT
LINK
