AirTAC
AirTAC GV Series Soft-start Valve
Product Made in Japan
Manufacturer: AirTAC Co., Ltd.
Model: GV Series
Symbol
Product Feature
A soft start-up valve is used to input compressed air into the pneumatic system slowly and has the effect of safety and protection. Air intake is connected with the input P of the Soft start-up valve. If the coil is energized, the 3/2 way valve opens. At this time, a little air comes to output A through the throttle valve, which increases the pressure of the system gradually; when the output pressure is equal to half of the input pressure, the Soft start-up valve completely opens and the flow at this time reaches the highest value of itself. When the coil is de-energized, air intake P closes, the air returns to the R orifice through the reflux valve and is quickly exhausted. The pressure of the system falls to zero, which protects the whole system.
Specification
| Model | GV200-06 | GV200-08 | GV300-08 | GV300-10 | GV300-15 | GV400-10 | GV400-15 |
|---|---|---|---|---|---|---|---|
| Fluid | Air | ||||||
| Port size [Note1] | 1/8″ | 1/4″ | 1/4″ | 3/8″ | 1/2″ | 3/8″ | 1/2″ |
| Pressure range | 0.25~1.0MPa (35~145psi) | ||||||
| Proof pressure | 1.5MPa (215psi) | ||||||
| Temperature range | -20~70°C | ||||||
| Acting type | Solenoid control | ||||||
| Exhaust port size | 1/4″ | ||||||
| Power connection | Terminal, Grommet | ||||||
| Standard voltage | AC220V, 110V, 24V (50\60Hz); DC12V, 24V | ||||||
| Voltage range | -15%~+10% | ||||||
| Insulation | Class B | ||||||
| Power consumption | AC: 3.5VA; DC: 2.5W | ||||||
| Optional pressure gauge | F: Square pressure gauge; C: Circular pressure gauge | ||||||
| Suitable F.R.L type | GC200-06 GAC200-06 |
GC200-08 GAC200-08 |
GC300-08 GAC300-08 |
GC300-10 GAC300-10 |
GC300-15 GAC300-15 |
GC400-10 GAC400-10 |
GC400-15 GAC400-15 |
[Note1] PT thread, G thread and NPT thread are available.
Ordering Code
Inner Structure
| No. | Item | No. | Item | No. | Item |
|---|---|---|---|---|---|
| 1 | Bottom cover | 13 | Gasket | 25 | Spring |
| 2 | Gasket | 14 | Gasket | 26 | Manual override |
| 3 | Spool | 15 | Pilot kit | 27 | Fixed screw |
| 4 | Body | 16 | Spring | 28 | Spring |
| 5 | O-ring | 17 | Fixed plate | 29 | Valve spool |
| 6 | O-ring | 18 | Coil set | 30 | O-ring |
| 7 | Spring | 19 | Nut | 31 | Valve spool |
| 8 | Inlet piston | 20 | Connector | 32 | O-ring |
| 9 | Piston gasket | 21 | Spring | 33 | O-ring |
| 10 | O-ring | 22 | O-ring | 34 | Inlet plug |
| 11 | Snap ring | 23 | Manual override block | ||
| 12 | Gasket | 24 | O-ring |
Dimensions
| Model\Item | A | AB | B | BA | C | K | KA | KB | KC | P | PA | Q |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GV20006 | 80 | 59 | 57 | 24.5 | 123.5 | 5.5 | 67 | 8 | 30.5 | 1/8″ | 30 | 1/4″ |
| GV20008 | 80 | 59 | 57 | 24.5 | 123.5 | 5.5 | 67 | 8 | 30.5 | 1/4″ | 30 | 1/4″ |
| GV30008 | 95 | 74 | 62.2 | 31.5 | 131 | 6.5 | 82 | 8 | 34.5 | 1/4″ | 34 | 3/8″ |
| GV30010 | 95 | 74 | 62.2 | 31.5 | 131 | 6.5 | 82 | 8 | 34.5 | 3/8″ | 34 | 3/8″ |
| GV30015 | 95 | 74 | 62.2 | 31.5 | 131 | 6.5 | 82 | 8 | 34.5 | 1/2″ | 34 | 3/8″ |
| GV40010 | 120 | 90 | 80 | 40.5 | 142.5 | 8.5 | 102 | 11 | 39 | 3/8″ | 40.5 | 1/2″ |
| GV40015 | 120 | 90 | 80 | 40.5 | 142.5 | 8.5 | 102 | 11 | 39 | 1/2″ | 40.5 | 1/2″ |
Attention
Manually adjust the “+” and “-” throttle screw at the bottom of the soft start-up valve as per the requirement of start speed. It shall go slowly, otherwise sudden acting of the product or system shall be caused with a heavy impact.
Related Products
REQUEST QUOTATION
PAYMENT
LINK
