Asahi Weldex, Japan
Asahi Weldex 200KP,400KP,550KP Positioner
Product Made in Japan
Manufacturer: Asahi Weldex
Model: 200KP,400KP,550KP
Positioner 200KP,400KP,550KP[ Rotating Jig Machine For Welding ]
Diverse Load Lineup
Specifications
200KP
| Maximum Loading Capacity table horizontal 0 degrees | 200kg |
|---|---|
| Maximum Loading Capacity Table vertical 90 degrees (center of gravity position 100 mm from table surface) | 80kg |
| Turntable Diameter | Φ330mm |
| Turntable Tilt Angle | 90 degree |
| Power Supply | 100V |
| Electric Motor | 40W |
| Turntable Rotation Speed (At No Load) | 6 revolutions/minute |
| Table Tilt Method | manual |
| Allowable Welding Power | 500A |
| Method Of Operation | foot switch |
| Installation Area | 490×230mm |
| Weight | 54kg |
| External Dimensions | 525(W) × 330(D) × 370(H)
|
400KP
| Maximum Loading Capacity table horizontal 0 degrees | 400kg |
|---|---|
| Maximum Loading Capacity Table vertical 90 degrees (center of gravity position 100 mm from table surface) | 180kg |
| Turntable Diameter | Φ400mm |
| Tturntable Tilt Angle | 90 degree |
| Power Supply | 100V |
| Electric Motor | 60W |
| Turntable Rrotation Speed (at no load) | 6 revolutions/minute |
| Table Tilt Method | manual |
| Allowable Welding Power | 600A |
| Method Of Operation | foot switch |
| Installation Area | 610×250mm |
| Weight | 124kg |
| External Dimensions | 700(W) x 400(D) x 450(H) |
550KP
| Maximum Loading Capacity table horizontal 0 degrees | 550kg |
|---|---|
| Maximum Loading Capacity Table vertical 90 degrees (center of gravity position 100 mm from table surface) | 250kg |
| Turntable Diameter | Φ560mm |
| Turntable Tilt Angle | 90 degree |
| Power Supply | 100V |
| Electric Motor | 60W |
| Turntable Rotation Speed (at no load) | 2.4 rev/min |
| Table Tilt Method | manual |
| Allowable Welding Power | 600A |
| Method Of Operation | foot switch |
| Installation Area | 740×350mm |
| Weight | 230kg |
| External Dimensions | 875(W) × 560(D) × 550(H) |
Related Products
-
TONE CS700 Combination Wrench Set
-
Ross Asia MD3 series Port size is 1/4″ to 1/2″. Flow rates up to 110 scfm (3115 l/min)
-
Kansai Electric Heat Corp 6BL4-110-0.4MPa Hot-Air
-
Kanetec KMDY Powerful Type 3-Phase AC Demagnetier
-
Nakatani Kikai NAS7B‐DR Angle Grinder (7 Inch Type)
-
Tokyo Ko-on Denpa TYPE P2510, P2520 Series Variable Potentiometer
